1ELTE-L-S (TDD/FDD/HSPA+ Interface Card)

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

1ELTE-L-S (TDD/FDD/HSPA+ Interface Card)

Card Overview

The 1ELTE-L-S is a high-speed wireless WAN access module. It provides high-speed wireless data transmission, enabling enterprise users to connect to all types of wireless networks.

A 1ELTE-L-S card can be installed in a SIC slot of a router.

Figure 7-129 shows the appearance of a 1ELTE-L-S card.

Figure 7-129 1ELTE-L-S card appearance
Click to enlarge

Version Mapping

Table 7-294 lists the device models and software versions supporting the 1ELTE-L-S.

Table 7-294 Version mapping

Card Name	Device Model
1ELTE-L-S NOTE: This card is supported in V200R010C10 version.	AR1200 series (All models in this series except the AR1220C and AR1220-8GE) AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE) AR3200 series AR3600 series

Card Name

Device Model

1ELTE-L-S

NOTE:

This card is supported in V200R010C10 version.

AR1200 series (All models in this series except the AR1220C and AR1220-8GE)

AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE)

AR3200 series

AR3600 series

Functions and Features

Table 7-295 describes the functions and features of a 1ELTE-L-S card.

Table 7-295 Functions and features

Function and Feature	Description
Basic functions	Dials up to an LTE network to provide high-speed data transmission.
Basic functions	Provides a backup link for a WAN link, to improve communication reliability between an enterprise's headquarters and branch networks.
High bandwidth	Supports LTE FDD and provides up to 50 Mbit/s uplink rate and 150 Mbit/s downlink rate.
Excellent 4G experience	Implements on-demand dialup and provides end-to-end QoS.
	Automatically scans different 4G frequency bands.
	Delivers fast 4G access service using industry-leading wireless technologies.
Flexible wireless standards	Maintains compatibility with 3G services.
	Supports the LTE FDD, LTE TDD, DC-HSPA+, WCDMA, EDGE, GPRS, and GSM standards.
	Provides wireless access solutions for carriers and enterprises, enabling users to connect to all types of wireless networks.
Rapid deployment	Allows users to connect to an LTE network as soon as a SIM card is installed on the card.

Panel

Figure 7-130 shows the indicators on a 1ELTE-L-S card, and Table 7-296 describes the indicator states and meanings.

Figure 7-130 Indicators on a 1ELTE-L-S card
Click to enlarge

Table 7-296 Indicator description

Number	Indicator	Color	Description
1	STAT	Green	Steady on: The system has been powered on, but the system software is not running. Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting.
		Red	Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually.
		Off	Off: The system software is not running or is resetting.
2	LTE	Green	Steady on: The LTE signal strength is high. Fast blinking: The LTE signal strength is medium. Slow blinking: The LTE signal strength is low. Off: No LTE signal is available.
3	3G	Green	Steady on: The 3G signal strength is high. Fast blinking: The 3G signal strength is medium. Slow blinking: The 3G signal strength is low. Off: No 3G signal is available.
4	WWAN	Green	Steady on: An LTE/3G link has been set up and is active. Blinking: Data is being transmitted or received over the LTE/3G link. Off: The LTE/3G link has not been set up or is inactive.

Figure 7-131 shows the interfaces on a 1ELTE-L-S card.

Figure 7-131 Interfaces on a 1ELTE-L-S card
Click to enlarge

1. Primary LTE antenna interface

2. Secondary LTE antenna interface

3. Two SIM card slots

NOTE:

The double-card single-standby is supported, and SIM-A is the default master card.
If only one SIM card needs to be installed, install it in slot SIM-A.
The standard SIM card is supported. It is not recommended to use the card cover to prevent poor SIM card contact.
Hot-swap SIM card is not supported. After replugging the SIM card, you need to restart the RF module or restart the device.

LTE antenna interface

LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna only receives LTE signals to help improve the downlink rate. Table 7-297 lists attributes of an LTE antenna interface.

Table 7-297 LTE antenna interface attributes

Attribute	Description
Connector type	SMA-K (screw threads outside and a hole inside)
Standards compliance and frequency bands supported	LTE FDD: bands 1/3/5/7/8/20 LTE TDD: bands 38/40/41 WCDMA: band 1/5/8 GSM: 900/1800 (MHz)
Rate	LTE FDD: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s LTE TDD: uplink rate of 30 Mbit/s and downlink rate of 130 Mbit/s DC-HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 42 Mbit/s WCDMA PS: uplink rate of 384 kbit/s and downlink rate of 384 kbit/s WCDMA CS: uplink rate of 64 kbit/s and downlink rate of 64 kbit/s EDGE: uplink rate of 118 kbit/s and downlink rate of 237 kbit/s GPRS: uplink rate of 85.6 kbit/s and downlink rate of 107 kbit/s GSM: uplink rate of 9.6 kbit/s and downlink rate of 14.4 kbit/s
Cable type	LTE Whip Antenna

Technical Specifications

Table 7-298 lists the technical specifications of a 1ELTE-L-S card.

Table 7-298 Technical specifications

Item	Specification
Card type	SIC
Hot swap	Supported
Physical specifications	Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.) Maximum power consumption: 9 W Weight: 0.35 kg (0.77 lb)
Environment parameters	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% to 95%, noncondensing Storage temperature: -40°C to +70°C (-40°F to +158°F) Operating altitude: 0 m to 5000 m (0 ft. to 16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-299 provides 1ELTE-L-S card ordering information.

Table 7-299 Ordering information

Part Number	Model	Name Label (Silkscreen)	Description
02312WWT	AR-1ELTE-L-S	1ELTE-L-S	TDD/FDD/HSPA+ interface card

Card Overview
Version Mapping
Functions and Features
Panel
Technical Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2023-08-08

Document ID: EDOC1000009848

Downloads: 19186

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate