8E1/T1-M (8-Port Channelized E1/PRI Multiflex Trunk Interface Card)
Card Overview
The 8E1/T1-M is a data and image signal processing module for a router and provides eight CE1/PRI interfaces for high-density WAN connection, WAN aggregation, and dialup.
An 8E1/T1-M card can be installed in a WSIC slot of a router.
Figure 7-81 shows the appearance of an 8E1/T1-M card.
Version Mapping
Table 7-191 lists the device models and software versions supporting the 8E1/T1-M.
Card Name |
Device Model |
|---|---|
8E1/T1-M NOTE:
This card is supported in V200R003C00 and later versions. |
AR1200 series (All models in this series except the AR1220C and AR1220-8GE) AR2204 AR2204E AR2204E-D AR2204XE AR2204XE-DC AR2220 AR2220L-AC AR2220L-DC AR2220E AR2240 AR2240C AR3200 series AR3600 series |
Functions and Features
Table 7-192 describes the functions and features of an 8E1/T1-M card.
Function and Feature |
Description |
|---|---|
Data transmission |
Connects to a WAN through E1/CE1 interfaces to complete data transmission |
An E1 line supports up to 32 data channels and provides a total bandwidth of up to 2 Mbit/s. |
|
A channelized E1 line allows 31 timeslots to be flexibly bundled into multiple channels. The rate of each channel is 64 kbit/s multiplied by n, where n is the number of timeslots in the bundle and ranges from 1 to 31. |
|
Multi-service transmission |
Supports transmission of data, voice, and video services, without interference between these services. |
WAN aggregation |
Aggregates E1 lines of multiple branches to the headquarters. |
ISDN dialup |
Transmits various services, such as voice, high-speed fax, video call, intelligent telegraph, and teletext, at a rate of up to 2 Mbit/s. |
Flexible and easy deployment |
A CE1/PRI interface can be flexibly configured as a WAN interface or data interface, which simplifies networking. |
Panel
Figure 7-82 shows the indicators on an 8E1/T1-M card, and Table 7-193 describes the indicator states and meanings.
Number |
Indicator |
Color |
Description |
|---|---|---|---|
1 |
STAT |
Green |
Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting. |
Red |
Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. |
||
Off |
The system software is not running or is resetting. |
||
2 |
One dual-color indicator for each CE1 interface |
Green |
Steady on: A link has been established on the interface. Off: No link is established on the interface. |
Amber |
Blinking: Data is being transmitted or received on the interface. Off: No data is being transmitted or received on the interface. |
||
Off |
The interface is not connected. |
Figure 7-83 shows the interfaces on an 8E1/T1-M card.
1. Eight CE1/PRI interfaces |
CE1 interface (channelized)
Technical Specifications
Table 7-195 lists the technical specifications of an 8E1/T1-M card.
Item |
Specification |
|---|---|
Card type |
WSIC |
Hot swap |
Supported |
Physical specifications |
|
Environment parameters |
|
Ordering Information
To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.
Table 7-196 provides 8E1/T1-M card ordering information.