1GEC (1-Port-GE Combo WAN Interface Card)

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

1GEC (1-Port-GE Combo WAN Interface Card)

Card Overview

1GEC is a GE high-speed WAN access module and a combo interface that can function as the GE electrical or optical interface. You can flexibly select the interface to connect to a WAN.

A 1GEC card can be installed in a SIC slot of a router.

Figure 7-51 shows the appearance of a 1GEC card.

Figure 7-51 1GEC card appearance

Version Mapping

Table 7-129 lists the device models and software versions supporting the 1GEC.

Table 7-129 Version mapping

Card Name	Device Model
1GEC NOTE: This card is supported in V200R001C01 and later versions.	AR1200 series (All models in this series except the AR1220E series) AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE) AR3200 series AR3600 series

Card Name

Device Model

1GEC

NOTE:

This card is supported in V200R001C01 and later versions.

AR1200 series (All models in this series except the AR1220E series)

AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE)

AR3200 series

AR3600 series

Functions and Features

Table 7-130 describes the functions and features of a 1GEC card.

Table 7-130 Functions and features

Function and Feature	Description
Basic functions	You can flexibly use the electrical or optical interface to connect to a network.
Basic functions	The GE electrical or optical interface can connect to a WAN at the rate of 1000 Mbit/s to provide Layer 3 services.
Layer 3 protocols	IPv4, IPv6, and MPLS.

Panel

Figure 7-52 shows the indicators on a 1GEC card, and Table 7-131 describes the indicator states and meanings.

Figure 7-52 Indicators on a 1GEC card
Click to enlarge

Table 7-131 Indicator description

Number	Indicator	Color	Description
1	STAT	Green	Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting.
		Red	Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually.
		Off	Off: The software is not running or is being reset.
2 and 3	GE electrical interface indicators: 2: ACT indicator 3: LINK indicator	Yellow	Blinking: Data is being transmitted or received.
		Yellow	Off: No data is being transmitted or received.
		Green	Steady on: A link has been established.
		Green	Off: No link is established.
4 and 5	GE optical interface indicators: 5: ACT indicator 4: LINK indicator	Yellow	Blinking: Data is being transmitted or received.
		Yellow	Off: No data is being transmitted or received.
		Green	Steady on: A link has been established.
		Green	Off: No link is established.

Figure 7-53 shows the interfaces on a 1GEC card.

Figure 7-53 Interfaces on a 1GEC card
Click to enlarge

1. One GE combo interface

GE combo interface

A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.

The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. It must be used with an Ethernet Cable.
The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s. It must be used with the fiber and optical module. The following optical modules are supported:
- FE SFP/eSFP Optical Module
- GE eSFP Optical Module

A combo interface works in auto mode and automatically works as an optical or electrical interface by default.

Technical Specifications

Table 7-132 lists the technical specifications of a 1GEC card.

Table 7-132 Technical specifications

Item	Specifications
Card type	SIC
Hot swap	Supported
Physical specifications	Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.) Maximum power consumption: 4 W Weight: 0.25 kg (0.55 lb)
Environment parameters	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% to 95%, noncondensing Storage temperature: -40°C to +70°C (-40°F to +158°F) Operating altitude: 0 to 5000 m (16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-133 provides 1GEC card ordering information.

Table 7-133 Ordering information

Part Number	Model	Name Label (Silkscreen)	Description
03020XTR	AR0MSEG1CA00	1GEC	1-Port GE Combo WAN Interface Card

Card Overview
Version Mapping
Functions and Features
Panel
Technical Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2023-08-08

Document ID: EDOC1000009848

Downloads: 19208

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate