3G-HSPA+7 (3G WCDMA HSPA+7 Interface Card)
Card Overview
The 3G-HSPA+7 is a 3G access card. It can function as the primary or backup link of an enterprise to connect to the Internet and transmit voice, video, and data services.
A 3G-HSPA+7 card can be installed in a SIC slot of a router.
Figure 7-114 shows the appearance of a 3G-HSPA+7 card.
Version Mapping
Table 7-259 lists the device models and software versions supporting the 3G-HSPA+7.
Card Name |
Device Model |
|---|---|
3G-HSPA+7 NOTE:
This card is supported in V200R002C01 and later versions. |
AR1200 series (All models in this series except the AR1220C and AR1220-8GE) AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE) AR3200 series AR3600 series |
Functions and Features
Table 7-260 describes the functions and features of a 3G-HSPA+7 card.
Function and Feature |
Description |
|---|---|
Basic functions |
Functions as the primary or backup link of an enterprise to connect to the Internet and transmit enterprise communication services. |
Provides a backup link for a WAN link, to improve communication reliability between an enterprise's headquarters and branch networks. |
|
Good 3G experience |
Implements on-demand dialup and provides wireless QoS. |
Automatically scans different 3G frequency bands. |
|
Transmits voice services in PS/CS domains. |
|
Uses advanced wireless technologies and provides super high-speed 3G wireless experience. |
|
Flexible wireless standards |
Flexibly switches between 2G and 3G. |
Supports HSPA+, WCDMA, EDGE, GPRS, and GSM. |
|
Provides wireless solutions on LTE migration for carriers and enterprises. |
Panel
Figure 7-115 shows the indicators on a 3G-HSPA+7 card, and Table 7-261 describes the indicator states and meanings.
Number |
Indicator |
Color |
Description |
|---|---|---|---|
1 |
STAT |
Green |
Steady on: The router has been powered on, but the system software is not running. Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting. |
Red |
Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. |
||
Off |
Off: The software is not running or is being reset. |
||
2 |
3G |
Green |
Steady on: The 3G signal strength is high. Slow blinking: The 3G signals strength is low. Fast blinking: The 3G signals strength is medium. Off: No 3G signal is available. |
3 |
2G |
Green |
Steady on: The 2G signal strength is high. Slow blinking: The 2G signals strength is low. Fast blinking: The 2G signals strength is medium. Off: No 2G signal is available. |
4 |
WWAN |
Green |
Steady on: The 3G/2G connection is being established or is active. Blinking: Data is being transmitted or received over the 3G/2G connection. Off: The 3G/2G connection has not been established or is inactive. |
Figure 7-116 shows the interfaces on a 3G-HSPA+7 card.
1. One primary 3G antenna interface |
2. One secondary 3G antenna interface |
3. One Mini USB interface |
4. One SIM card slot NOTE:
|
3G-HSPA+7 antenna interface
Attribute |
Description |
|---|---|
Connector type |
SMA-K (screw threads outside and a hole inside) |
Standards compliance and frequency bands supported |
|
Rate |
|
Cable type |
Mini USB interface
Technical Specifications
Table 7-264 lists the technical specifications of a 3G-HSPA+7 card.
Item |
Specifications |
|---|---|
Card type |
SIC |
Hot swap |
Supported |
Physical specifications |
|
Environment parameters |
|
Ordering Information
To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.
Table 7-265 provides 3G-HSPA+7 card ordering information.