4ES2G-S (4-Port 1000BASE-RJ45 L2 Ethernet Interface Card)

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

4ES2G-S (4-Port 1000BASE-RJ45 L2 Ethernet Interface Card)

Card Overview

A 4ES2G-S card provides four GE electrical interfaces. This card is installed in a SIC slot and provides line-rate Layer 2 switching and device management functions.

Figure 7-45 shows the appearance of a 4ES2G-S card.

Figure 7-45 4ES2G-S card appearance

Version Mapping

Table 7-117 lists the device models and software versions supporting the 4ES2G-S.

Table 7-117 Version mapping

Card Name	Device Model
4ES2G-S NOTE: This card is supported in V200R005C00 and later versions. When this card is used on a router, the minimum bandwidth and maximum bandwidth supported by the card are both 1 Gbit/s, due to the backplane bandwidth restriction.	AR1200 series (All models in this series except the AR1220E, AR1220EV, and AR1220EVW) AR2204 AR2204E AR2204E-D AR2204XE (This card is supported in V200R010C00 and later versions.) AR2204XE-DC AR2220 AR2220L-AC AR2220L-DC AR2220E AR2240 AR2240C AR3200 series

Card Name

Device Model

4ES2G-S

NOTE:

This card is supported in V200R005C00 and later versions.

When this card is used on a router, the minimum bandwidth and maximum bandwidth supported by the card are both 1 Gbit/s, due to the backplane bandwidth restriction.

AR1200 series (All models in this series except the AR1220E, AR1220EV, and AR1220EVW)

AR2204

AR2204E

AR2204E-D

AR2204XE (This card is supported in V200R010C00 and later versions.)

AR2204XE-DC

AR2220

AR2220L-AC

AR2220L-DC

AR2220E

AR2240

AR2240C

AR3200 series

Functions and Features

Table 7-118 describes the functions and features of a 4ES2G-S card.

Table 7-118 Functions and features

Function and Feature	Description
Four GE electrical interfaces	Provide up to 1000 Mbit/s line-rate switching.
Switching between LAN and WAN ports	Only in V200R010, all LAN ports on 4ES2G-S card can switch to WAN ports.
Duplex mode	Supports the half-duplex and full-duplex modes. The full-duplex mode is more commonly used.
VLAN	Supports a maximum of 4094 VLANs.
Voice VLAN	Allows voice data flows to be transmitted preferentially, ensuring high quality voice services.
VLANIF	Supports VLANIF interface configuration to increase the number of Layer 3 interfaces.
Layer 2 features	Support MAC, STP, RSTP, MSTP, and LLDP.

Panel

Figure 7-46 shows the indicators on a 4ES2G-S card, and Table 7-119 describes the indicator states and meanings.

Figure 7-46 Indicators on a 4ES2G-S card
Click to enlarge

Table 7-119 Indicator description

Number	Indicator	Color	Description
1	STAT	Green	Steady on: The system software is running normally.
1	STAT	Green	Off: The card is not powered on.
2	ACT	Yellow	Blinking: The interface is transmitting and receiving data.
2	ACT	Yellow	Off: The interface is not transmitting or receiving data.
3	LINK	Green	Steady on: A link has been established on the interface.
3	LINK	Green	Off: No link is established on the interface.

Figure 7-47 shows the interfaces on a 4ES2G-S card.

Figure 7-47 Interfaces on a 4ES2G-S card
Click to enlarge

1. Four GE electrical interfaces

GE electrical interface

A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 7-120 lists attributes of a GE electrical interface.

Table 7-120 GE electrical interface attributes

Attribute	Description
Connector type	RJ45
Interface attribute	MDI/MDIX NOTE: MDI stands for medium dependent interface, an Ethernet interface connection mode. Ethernet interfaces of most network adapters are MDI interfaces. MDIX stands for medium dependent interface crossover, a version of MDI. MDIX interfaces are usually used on hubs or LAN switches.
Standards compliance	IEEE802.3, IEEE802.3u, IEEE802.3ab
Frame format	Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol	IP
Cable type	Ethernet Cable

Technical Specifications

Table 7-121 lists the technical specifications of a 4ES2G-S card.

Table 7-121 Technical specifications

Item	Specifications
Card type	SIC
Hot swap	Supported
Physical specifications	Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.) Maximum power consumption: 8 W Weight: 0.3 kg (0.66 lb)
Environment parameters	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% to 95%, noncondensing Storage temperature: -40°C to +70°C (-40°F to +158°F) Operating altitude: 0 to 5000 m (16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-122 provides 4ES2G-S card ordering information.

Table 7-122 Ordering information

Part Number	Model	Name Label (Silkscreen)	Description
03021VCC	AR-4ES2G-S	4ES2G-S	4-port 1000BASE-RJ45 L2 Ethernet interface card (SIC)

Card Overview
Version Mapping
Functions and Features
Panel
Technical Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2023-08-08

Document ID: EDOC1000009848

Downloads: 19181

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate