No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AR169FVW-8S

AR169FVW-8S

Version Mapping

Table 4-343 describes the mapping between the AR169FVW-8S router and software versions.

Table 4-343 Mapping between the AR169FVW-8S router and software versions

Router Model

Software Version

AR169FVW-8S

V200R008C50 and later versions

Appearance and Structure

Figure 4-103 shows the appearance of the AR169FVW-8S router.

Figure 4-103 AR169FVW-8S appearance

1

USB interface (host)

2

Two Wi-Fi antennas

3

CON/AUX interface

NOTE:

The AR169FVW-8S does not support AUX login.

4

WAN interface: GE combo interface

5

LAN interfaces: four GE electrical interfaces

NOTE:
  • GE0 is a management interface and is used to upgrade the router.
  • All GE LAN interfaces can be configured as WAN interfaces.

6

RESET button

NOTE:
This button is used to reset the router.
  • To restore the factory settings, hold down the button for at least 5 seconds.
  • To reset the system, press the button for less than 5 seconds.
Resetting the router will interrupt services. Exercise caution when deciding to press this button.

7

Power jack

NOTE:

The router uses a 60 W power adapter.

8

Jack for power cable locking strap

NOTE:

Insert a power cable locking strap in this jack to secure the power cable.

9

WAN interface: VDSL interface

NOTE:
  • By default, VDSL0 and VDSL1 are bundled and used together.
  • VDSL0 and VDSL1 can be unbundled. After unbundled, only VDSL0 is used to transmit data.
  • The VDSL interfaces support the dying gasp function.

10

Two Wi-Fi antenna interfaces

11

Product model silkscreen

12

Ground point

NOTE:

Reliably ground the router by connecting a ground cable to the ground point to protect the router against lightning and interference.

13

One FXO interface

NOTE:

The FXO interface can be connected to a public switched telephone network (PSTN) using a Universal Telephone Cable.

14

Eight FXS interfaces

NOTE:

The FXS interfaces can be connected to analog telephones using a Universal Telephone Cable.

Indicator Description

Figure 4-104 shows the indicators on the AR169FVW-8S router.

Figure 4-104 Indicators on the AR169FVW-8S

Number

Indicator

Color

Description

1

PWR

Green

Steady on: The system power supply is normal.

Off: The system power is off.

2

SYS

Red and green

Slow blinking green: The system is running properly.

Fast blinking green: The system is being powered on or restarting.

Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.

Off: The system software is not running or is resetting.

3

USB

Red and green

Steady green: The system has been upgraded or configured using a USB flash drive.

Blinking green: The system is being upgraded or configured using a USB flash drive.

Steady red: The system fails to be upgraded or configured using a USB flash drive.

Off: No USB flash drive is connected, the USB interface has failed, or the indicator has failed.

4

PPP

Green

Steady on: A PPP connection has been established.

Off: No PPP connection is established.

5

VPN

Green

Steady on: The IPSec service is running normally.

Off: The IPSec service is unavailable.

6

Left VDSL indicator (LINK0)

Right VDSL indicator (LINK1)

Green

Steady on: A link has been established on the WAN interface.

Blinking: The WAN link on the interface is activating.

Off: No link is established on the WAN interface.

7

GE combo interface indicator

Green

Steady on: A link has been established on the GE combo interface.

Blinking: Data is being transmitted or received on the GE combo interface.

Off: No link is established on the GE combo interface.

8

WLAN

Green

Blinking: The WLAN link is transmitting data. The blinking frequency changes with the traffic transmission rate on the link.

Off: The WLAN link is shut down.

9

LAN/WAN (GE0)

Green

Steady on: A link has been established on the corresponding LAN/WAN interface.

Blinking: Data is being transmitted or received on the corresponding LAN/WAN interface.

Off: No link is established on the corresponding LAN/WAN interface.

10

LAN (GE1 to GE3)

Green

Steady on: A link has been established on the corresponding LAN interface.

Blinking: Data is being transmitted or received on the corresponding LAN interface.

Off: No link is established on the corresponding LAN interface.

11

FXO

Green

Steady on: The FXO channel is being occupied by a call.

Off: The FXO channel is idle.

12

FXS0 to FXS7

Green

Steady on: The corresponding FXS channel is being occupied by a call.

Off: The corresponding FXS channel is idle.

Interface Description

CON/AUX interface

The console interface of a router can connect to an operation terminal for onsite configuration. An AUX interface can connect to a remote management center through a modem for remote configuration. Table 4-344 lists the CON/AUX interface attributes.
Table 4-344 CON/AUX interface attributes

Attribute

Description

Connector type

RJ45

Standards compliance

RS232

Working mode

Full-duplex Universal Asynchronous Receiver/Transmitter (UART)

Data equipment type
  • Data circuit terminal equipment (DCE)
  • AUX interface: data terminal equipment (DTE)

Cable type

Console Cable

USB interface (host)

A USB interface provides up to 480 Mbit/s upload and download rates. Table 4-345 lists attributes of a USB interface.
Table 4-345 USB interface attributes

Attribute

Description

Connector type

Type A

Standards compliance

USB2.0

Working mode

Host

GE electrical interface

A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 4-346 lists attributes of a GE electrical interface.
Table 4-346 GE electrical interface attributes

Attribute

Description

Connector type

RJ45

Interface attribute

MDI/MDIX

NOTE:
  • MDI stands for medium dependent interface, an Ethernet interface connection mode. Ethernet interfaces of most network adapters are MDI interfaces.
  • MDIX stands for medium dependent interface crossover, a version of MDI. MDIX interfaces are usually used on hubs or LAN switches.

Standards compliance

IEEE802.3, IEEE802.3u, IEEE802.3ab

Frame format

Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Network protocol

IP

Cable type

Ethernet Cable

GE combo interface

A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
  • The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. It must be used with an Ethernet Cable.
  • The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s. It must be used with an Optical Fiber, GE eSFP Optical Modules, or FE SFP/eSFP Optical Modules.
  • In V200R008C30 and earlier versions, a combo interface works as an electrical interface and uses a network cable to transmit and receive data by default.
  • In V200R008C50 and later versions, a combo interface works in auto mode and automatically works as an optical or electrical interface by default.

Wi-Fi antenna interface

A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 4-347 lists attributes of a Wi-Fi antenna interface.
Table 4-347 Wi-Fi antenna interface attributes

Attribute

Description

Connector type

RP-SMA-K (screw threads outside and a pin inside)

Standards compliance

802.11b/g/n

Frequency band supported

2.4 GHz

Rate

300 Mbit/s

MIMO mode (Tx x Rx)

2x2

Gain

2.15 dBi

Services provided
  • Layer 2/3 wireless access
  • Wireless data encryption
  • WLAN security

Cable type

Wi-Fi Whip Antenna

VDSL interface

A very-high-speed digital subscriber line (VDSL) interface transmits service data from a LAN to an upstream device at a high speed. Table 4-348 lists attributes of a VDSL interface.
Table 4-348 VDSL interface attributes

Attribute

Description

Connector type

RJ11

Standards compliance
  • ITU-T G.993.2
  • ITU-T G.992.5
  • ITU-T G.992.3
  • ITU-T G.992.1 G.DMT
  • ANSI T1.413 Issue 2

Rate
  • ADSL2+ full rate mode (ITU-T G.992.5): downlink rate of 24 Mbit/s and uplink rate of 1 Mbit/s
  • VDSL2 mode (ITU-T G.993.2): downlink rate of 100 Mbit/s and uplink rate of 50 Mbit/s
  • ADSL2 full rate mode (ITU-T G.992.3): downlink rate of 12 Mbit/s and uplink rate of 1 Mbit/s
  • ADSL full rate mode (G.992.1 G.DMT): downlink rate of 8 Mbit/s and uplink rate of 1 Mbit/s

Cable type

2VDSL2 Cable

FXS interface

A foreign exchange station (FXS) interface is an analog subscriber line interface and can connect to an analog phone or fax machine. Table 4-349 lists attributes of an FXS interface.
Table 4-349 FXS interface attributes

Attribute

Description

Connector type

RJ11

Standards compliance

ITU Q.512 for the FXS interface

ITU K.20 for overcurrent protection and overvoltage protection

Dialing mode

DTMF in accordance with GB3378

Bandwidth

300 Hz to 3400 Hz

Cable type

Universal Telephone Cable

FXO interface

A foreign exchange office (FXO) interface is a loop trunk interface and can connect to a PSTN network. Table 4-350 lists attributes of an FXO interface.
Table 4-350 FXO interface attributes

Attribute

Description

Connector type

RJ11

Standards compliance

ITU Q.552 for the FXO interface

ITU K.20 for overcurrent protection and overvoltage protection

Dialing mode

Dual tone multiple frequency (DTMF) in accordance with GB3378

Bandwidth

300 Hz to 3400 Hz

Cable type

Universal Telephone Cable

Technical Specifications

Table 4-351 lists the technical specifications of the AR169FVW-8S router.

Table 4-351 AR169FVW-8S technical specifications

Item

Specification

System parameters

Processor

Dual-core, 533 MHz

Memory

1 GB

Flash

512 MB

Micro SD card (default sd1)

None

Hard disk

Not supported

Dimensions and weight

Dimensions (H x W x D)
  • With no mounting bracket installed: 44.0 mm x 300.0 mm x 216.4 mm (1.73 in. x 11.81 in. x 8.52 in.)
  • With mounting brackets installed: 44.0 mm x 482.6 mm x 216.4 mm (1.73 in. x 19.00 in. x 8.52 in.)

Weight

2.8 kg (6.17 lb)

Power specifications

Rated input voltage range (AC)

100 V to 240 V, 50/60 Hz

Maximum input voltage range (AC)

90 V to 264 V, 47 Hz to 63 Hz

Maximum output current

5 A

Maximum output power

60 W

RPS power supply

Not supported

PoE power supply

Not supported

Power consumption

Maximum power consumption

33.8 W

Heat dissipation

Fans

None

Airflow (facing the front panel)

None

Interface density

Management interfaces

1 (RJ45)

CON/AUX interfaces

1 (RJ45)

USB 2.0 interfaces

1

Service interfaces

WAN interfaces: one GE combo interface and one VDSL interface

LAN interfaces: two Wi-Fi antenna interfaces and four GE electrical interfaces, among which LAN interface GE0 can be used as a WAN interface

Voice interfaces: eight FXS interfaces and one FXO interface

Extended slots

Not supported

Environment parameters

Operating temperature

0°C to 45°C (32°F to 113°F)

NOTE:

When the altitude is 1800-5000 m (5906-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Operating relative humidity

5% to 95%, noncondensing

Operating altitude

< 5000 m (16404.2 ft.)

Part number

50010370
Translation
简体中文
Download
Updated: 2023-08-08

Document ID: EDOC1000009848

Views: 1748198

Downloads: 19170

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :