1ADSL-A/M (1-Port ADSL2+ ANNEX A/M WAN Interface Card)

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

1ADSL-A/M (1-Port ADSL2+ ANNEX A/M WAN Interface Card)

Card Overview

The 1ADSL-A/M is a WAN connection module that provides the ADSL service for enterprises, transmitting video, voice, and data services at a high speed over the Internet.

A 1ADSL-A/M card can be installed in a SIC slot of a router.

Figure 7-188 shows the appearance of a 1ADSL-A/M card.

Figure 7-188 1ADSL-A/M card appearance

Version Mapping

Table 7-410 lists the device models and software versions supporting the 1ADSL-A/M.

Table 7-410 Version mapping

Card Name	Device Model
1ADSL-A/M NOTE: This card is supported in V200R001C00 and later versions.	AR1200 series AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE) AR3200 series AR3600 series

Card Name

Device Model

1ADSL-A/M

NOTE:

This card is supported in V200R001C00 and later versions.

AR1200 series

AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE)

AR3200 series

AR3600 series

Functions and Features

Table 7-411 lists the functions and features of a 1ADSL-A/M card.

Table 7-411 Functions and features

Function and Feature	Description
Basic functions	Dials up to the Internet to provide high-speed data communication and video on demand (VoD) services.
Basic functions	Provides asymmetrical uplink and downlink rates (up to 3 Mbit/s uplink rate and 24 Mbit/s downlink rate).
Compatibility with PSTN	The Internet access and voice services share the same telephone cable.
Compatibility with PSTN	Users can connect to the Internet and make a call over a telephone cable at the same time, with a high Internet access rate and good voice communication quality.
Easy installation	Users can connect to the Internet by simply connecting a telephone cable to a modem.
Quick fault identification	The ADSL channel can be manually activated or deactivated for fault location.
Standards compliance	G.992.1, G.992.3, G.992.5, T1.413

Panel

Figure 7-189 shows the indicators on a 1ADSL-A/M card, and Table 7-412 describes the indicator states and meanings.

Figure 7-189 Indicators on a 1ADSL-A/M card
Click to enlarge

Table 7-412 Indicator description

Number	Indicator	Color	Description
1	STAT	Green	Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting.
		Red	Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually.
		Off	The system software is not running or is resetting.
2	LINK	Green	Steady on: The ADSL channel has been activated.
			Off: The ADSL channel has not been activated.
			Fast blinking: The ADSL channel is being activated.

Figure 7-190 shows the interface on a 1ADSL-A/M card.

Figure 7-190 Interface on a 1ADSL-A/M card
Click to enlarge

1. One ADSL-A/M interface

ADSL-A/M interface

An ADSL-A/M interface transmits service data from a LAN to an upstream device at a high speed. Table 7-413 lists attributes of an ADSL-A/M interface.

Table 7-413 ADSL-A/M interface attributes

Attribute	Description
Connector type	RJ11
Standards compliance	ITU-T G.992.1 G.DMT ANSI T1.413 Issue 2 ITU-T G.992.3 ITU-T G.992.5
Rate	ADSL full rate mode (ITU-T G.992.1 G.DMT): downlink rate of 8 Mbit/s and uplink rate of 1 Mbit/s ADSL2 full rate mode (ITU-T G.992.3): downlink rate of 12 Mbit/s and uplink rate of 1 Mbit/s ADSL2+ full rate mode (ITU-T G.992.5): downlink rate of 24 Mbit/s and uplink rate of 1 Mbit/s ADSL2 Annex M mode: a downlink rate of 12 Mbit/s and an uplink rate of 2 Mbit/s ADSL2+ Annex M mode: a downlink rate of 24 Mbit/s and uplink rate of 2 Mbit/s T1.413 mode: a downlink rate of 8 Mbit/s and an uplink rate of 1 Mbit/s
Cable type	Universal Telephone Cable

Technical Specifications

Table 7-414 lists the technical specifications of a 1ADSL-A/M card.

Table 7-414 Technical specifications

Item	Specification
Card type	SIC
Hot swap	Supported
Physical specifications	Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.) Maximum power consumption: 6 W Weight: 0.3 kg (0.66 lb)
Environment parameters	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% to 95%, noncondensing Storage temperature: -40°C to +70°C (-40°F to +158°F) Operating altitude: 0 m to 5000 m (0 ft. to 16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-415 provides 1ADSL-A/M card ordering information.

Table 7-415 Ordering information

Part Number	Model	Name Label (Silkscreen)	Description
02310GAX	AR0MSLA1XA01	1ADSL-A/M	1-Port ADSL2+ ANNEX A/M WAN Interface Module

Card Overview
Version Mapping
Functions and Features
Panel
Technical Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2023-08-08

Document ID: EDOC1000009848

Downloads: 19208

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate