16FXS Cable
Description
A 16FXS cable connects a 16FXS interface card to analog telephones. The DB68 connector of the cable is connected to the 16FXS interface card, and the bare wires at the other end must be cramped with RJ11 connectors before they can be connected to telephones.
Structure and Pin Assignments
Figure 8-14 shows the structure of a 16FXS cable.
Table 8-19 lists the pin assignments of a 16FXS cable.
X1 (DB68) |
Wire Color |
Signal |
Port |
|---|---|---|---|
36 |
Blue |
Tip(+) |
1 |
35 |
White |
Ring(-) |
|
38 |
Orange |
Tip(+) |
2 |
37 |
White |
Ring(-) |
|
40 |
Green |
Tip(+) |
3 |
39 |
White |
Ring(-) |
|
42 |
Brown |
Tip(+) |
4 |
41 |
White |
Ring(-) |
|
44 |
Gray |
Tip(+) |
5 |
43 |
White |
Ring(-) |
|
46 |
Blue |
Tip(+) |
6 |
45 |
Red |
Ring(-) |
|
48 |
Orange |
Tip(+) |
7 |
47 |
Red |
Ring(-) |
|
50 |
Green |
Tip(+) |
8 |
49 |
Red |
Ring(-) |
|
2 |
Brown |
Tip(+) |
9 |
1 |
Red |
Ring(-) |
|
4 |
Gray |
Tip(+) |
10 |
3 |
Red |
Ring(-) |
|
6 |
Blue |
Tip(+) |
11 |
5 |
Black |
Ring(-) |
|
8 |
Orange |
Tip(+) |
12 |
7 |
Black |
Ring(-) |
|
10 |
Green |
Tip(+) |
13 |
9 |
Black |
Ring(-) |
|
12 |
Brown |
Tip(+) |
14 |
11 |
Black |
Ring(-) |
|
14 |
Gray |
Tip(+) |
15 |
13 |
Black |
Ring(-) |
|
16 |
Blue |
Tip(+) |
16 |
15 |
Yellow |
Ring(-) |
Connection
A 16FXS cable is connected as follows:
- The DB68 connector is connected to the 16FXS interface card.
- The RJ11 connectors at the other end are connected to analog telephones.
Ordering Information
A 16FXS cable is delivered without RJ11 connectors. RJ11 connectors need to be made onsite.
Table 8-20 provides the 16FXS cable ordering information.