No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
1LTEC (LTE TDD/LTE FDD/HSPA+/TD-SCDMA/GSM Interface Card)

1LTEC (LTE TDD/LTE FDD/HSPA+/TD-SCDMA/GSM Interface Card)

Card Overview

The 1LTEC can be used to connect to an LTE network to provide secure, reliable, and high-performance wireless services for enterprises.

A 1LTEC card can be installed in a SIC slot of a router.

Figure 7-126 shows the appearance of a 1LTEC card.

Figure 7-126 1LTEC card appearance

Version Mapping

Table 7-287 lists the device models and software versions supporting the 1LTEC.

Table 7-287 Version mapping

Card Name

Device Model

1LTEC

NOTE:

This card is supported in V200R006C10 to V200R010 versions.

AR1200 series (All models in this series except the AR1220C and AR1220-8GE)

AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE)

AR3200 series

AR3600 series

Functions and Features

Table 7-288 describes the functions and features of a 1LTEC card.

Table 7-288 Functions and features

Function and Feature

Description

Basic functions

Dials up to an LTE network to provide high-speed data transmission.

Provides a backup link for a WAN link, to improve communication reliability between an enterprise's headquarters and branch networks.

High bandwidth

Supports LTE FDD and provides up to 50 Mbit/s uplink rate and 100 Mbit/s downlink rate.

Excellent 4G experience

Implements on-demand dialup and provides wireless QoS.

Automatically scans different 4G frequency bands.

Delivers fast 4G access service using industry-leading wireless technologies.

Flexible wireless format

Maintains compatibility with 3G services.

Supports LTE FDD, LTE TDD, DC-HSPA+, HSPA+, WCDMA, TD-HSPA+, TD-SCDMA, EDGE, GPRS, and GSM.

Provides 4G LTE wireless access solutions for carriers and enterprises.

Rapid deployment

Allows users to connect to an LTE network as soon as a SIM card is installed on the card.

Panel

Figure 7-127 shows the indicators on a 1LTEC card, and Table 7-289 describes the indicator states and meanings.

Figure 7-127 Indicators on a 1LTEC card
Table 7-289 Indicator description

Number

Indicator

Color

Description

1

STAT

Green

Steady on: The card has been powered on, but the system software is not running.

Slow blinking: The system is running properly.

Fast blinking: The system is being powered on or restarting.

Red

Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually.

Off

Off: The system software is not running or is resetting.

2

LTE

Green

Steady on: The LTE signal strength is high.

Fast blinking: The LTE signal strength is medium.

Slow blinking: The LTE signal strength is low.

Off: No LTE signal is available.

3

3G

Green

Steady on: The 3G signal strength is high.

Fast blinking: The 3G signal strength is medium.

Slow blinking: The 3G signal strength is low.

Off: No 3G signal is available.

4

WWAN

Green

Steady on: An LTE/3G link has been set up and is active.

Blinking: Data is being transmitted or received over the LTE/3G link.

Off: The LTE/3G link has not been set up or is inactive.

Figure 7-128 shows the interfaces on a 1LTEC card.

Figure 7-128 Interfaces on a 1LTEC card

1. Primary LTE antenna interface

2. Secondary LTE antenna interface

3. Mini USB interface

4. One SIM card slot

NOTE:
  • The standard SIM card is supported. It is not recommended to use the card cover to prevent poor SIM card contact.
  • Hot-swap SIM card is not supported. After replugging the SIM card, you need to restart the RF module or restart the device.

LTE antenna interface

LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna only receives LTE signals to help improve the downlink rate. Table 7-290 lists attributes of an LTE antenna interface.
Table 7-290 LTE antenna interface attributes

Attribute

Description

Connector type

SMA-K (screw threads outside and a hole inside)

Standards compliance and frequency bands supported
  • LTE FDD: bands 1/3/8
  • LTE TDD: bands 38/39/40/41
  • WCDMA: bands 1/2/5/8
  • TD-SCDMA: bands 34/39
  • GSM: 900/1800/1900 (MHz)

Rate
  • LTE FDD: 50 Mbit/s uplink rate and 100 Mbit/s downlink rate
  • LTE TDD: 18 Mbit/s uplink rate and 61 Mbit/s downlink rate
  • DC-HSPA+: 5.76 Mbit/s uplink rate and 42 Mbit/s downlink rate
  • HSPA+: 5.76 Mbit/s uplink rate and 21.6 Mbit/s downlink rate
  • HSPA: 64 kbit/s uplink rate and 384 kbit/s downlink rate
  • WCDMA PS: 384 kbit/s uplink rate and 384 kbit/s downlink rate
  • WCDMA CS: 64 kbit/s uplink rate and 64 kbit/s downlink rate
  • TD-HSPA+: 2.2 Mbit/s uplink rate and 4.2 Mbit/s downlink rate
  • TD-SCDMA: 384 kbit/s uplink rate and 384 kbit/s downlink rate
  • EDGE: 236.8 kbit/s uplink rate and 236.8 kbit/s downlink rate
  • GPRS: 85.6 kbit/s uplink rate and 85.6 kbit/s downlink rate
  • GSM: 9.6 kbit/s uplink rate and 14.4 kbit/s downlink rate

Cable type

LTE Whip Antenna

Mini USB interface

The Mini USB interface on an LTE card is used to commission the LTE module. Table 7-291 lists attributes of a Mini USB interface.
Table 7-291 Mini USB interface attributes

Attribute

Description

Connector type

Mini USB-B-angle

Standards compliance

USB2.0

Working mode

Device

Technical Specifications

Table 7-292 lists the technical specifications of a 1LTEC card.

Table 7-292 Technical specifications

Item

Specification

Card type

SIC

Hot swap

Supported

Physical specifications
  • Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.)
  • Maximum power consumption: 10 W
  • Weight: 0.2 kg (0.44 lb)

Environment parameters
  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% to 95%, noncondensing
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Operating altitude: 0 to 5000 m (16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-293 provides 1LTEC card ordering information.

Table 7-293 Ordering information

Part Number

Model

Name Label (Silkscreen)

Description

02311DVY

AR-1LTEC-S

1LTEC

LTE FDD/LTE FDD/HSPA+/TD-SCDMA/GSM interface Card
Translation
简体中文
Download
Updated: 2023-08-08

Document ID: EDOC1000009848

Views: 1756596

Downloads: 19188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :