Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Standard ISDN S/T Cable
Description
A 1BST interface card works in terminal equipment (TE) mode and supports only data services, but not voice services. The 1BST interface card uses a standard ISDN S/T cable (straight-through cable).
Structure and Pin Assignments
Figure 8-46 shows the structure of a standard ISDN S/T cable.
Table 8-72 shows the pin assignments of a standard ISDN S/T cable.
Connection
A standard ISDN S/T cable is connected as follows:
- One RJ45 connector is connected to the ISDN interface on a 1BST interface card.
- The other RJ45 connector is connected to a network device.
Ordering Information
Table 8-73 provides the standard ISDN S/T cable ordering information.