Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-GE-ZBXU1
Table 10-20 SFP-GE-ZBXU1 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | SFP-GE-ZBXU1 |
| Part Number | 02311DDC |
| Model | SFP-GE-ZBXU1 |
| Form factor | eSFP |
| Application standard | Non-standard |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| Transmission rate [bit/s] | 1 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 80 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1570 nm (RX) 1490 nm (TX) |
| Maximum Tx optical power [dBm] | 4.0 dBm |
| Minimum Tx optical power [dBm] | -2.0 dBm |
| Minimum extinction ratio [dB] | 9 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -26 dBm |
| Overload power [dBm] | -3.0 dBm |
NOTE:
Single-fiber bidirectional transmission is supported. Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example, SFP-GE-ZBXU1 must be used with SFP-GE-ZBXD1. |
|
This module can only be used on a device running V200R008C00 or a later version. A device running a version earlier than V200R008C00 may fail to obtain information about this module.