No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
2-Pin DC Power Cable (Phoenix Connector)

2-Pin DC Power Cable (Phoenix Connector)

Appearance and Structure

Figure 9-27 shows the appearance and structure of the 2-pin DC power cable and the Phoenix connector.

Figure 9-27 Structure of a 2-pin DC power cable and Phoenix connector


Table 9-14 lists the specifications of the 2-pin DC power cable.

Table 9-14 Specifications of a 2-pin DC power cable

Minimum Conductor Cross-Sectional Area (for the Power Cable Delivered with the Switch)

Maximum Conductor Cross-Sectional Area

0.75 mm2 or 18 AWG

3 mm2 or 12 AWG


One end of the 2-pin DC power cable is used with the Phoenix connector and connected to the DC input port of the S5720I-SI. The other end needs to be made onsite. You can make the power cables according to site requirements and connect the cables to the DC power supply system.

Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 558074

Downloads: 14286

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next