No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
S7X08000 (8-Port 10GE SFP+ Optical Interface Card)

S7X08000 (8-Port 10GE SFP+ Optical Interface Card)

Version Mapping

Table 9-148 lists the mapping between the S7X08000 card and software versions.

Table 9-148 Version mapping

Card Model

Software Version

S7X08000

V200R019C10 and later versions

Card Overview

The S7X08000 provides eight 10GE SFP+ optical ports for data access and line-rate switching by default. The port mode can be changed. After the change, the first two ports are 25GE ports, and the last six ports become unavailable.

The S7X08000 can be installed in a rear card slot of the switch models listed in Table 9-149.

Table 9-149 Applicable switch models

Card

Switch Model

S7X08000

  • S5731-H24T4XC
  • S5731-H24P4XC
  • S5731-H48T4XC
  • S5731-H48P4XC
  • S5731S-H24T4XC-A
  • S5731S-H48T4XC-A
Figure 9-72 S7X08000

Functions

Table 9-150 Functions

Function

Description

Basic function

Provides eight 10GE SFP+ optical ports for data access and line-rate switching by default. You can run the set card port-config-mode 25g-port enable command to change the port mode. After this command is configured, the first two ports are 25GE ports and the last six ports become unavailable.

Hot swapping

Supported

Service ports for stacking

The service ports on the card can be used as stack ports.

Indicators and Ports

Figure 9-73 Indicators on the S7X08000
Table 9-151 Indicator description

No.

Indicator

Color

Description

1

STAT

Off

The system software is not running.

Green

  • Fast blinking: The system is starting.
  • Slow blinking: The system is running properly.

Red

A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.

2

ACT/LINK

Green

  • Steady on: A link is established on the port.
  • Blinking: The port is sending or receiving data.

Off

No link is established on the port.

Figure 9-74 Ports on the S7X08000

1. Eight 10GE SFP+ optical ports, supporting 10GE/GE

You can run the set card port-config-mode 25g-port enable command to change the port mode. After this command is configured, the first two ports are 25GE SFP28 optical ports, and the last six ports become unavailable.

10GE SFP+ optical port

The S7X08000 provides 10GE SFP+ optical ports to transmit and receive service data at 10 Gbit/s or 1 Gbit/s. Table 9-152 lists the attributes of a 10GE SFP+ optical port.

The 10GE SFP+ optical ports support GE optical modules, GE copper modules, 10GE SFP+ optical modules, SFP+ copper cables (1 m, 3 m, 5 m, and 10 m; SFP+ to SFP+), and AOC cables (3 m and 10 m; SFP+ to SFP+).

Table 9-152 Attributes of a 10GE SFP+ optical port

Attribute

Description

Connector type

LC/PC

Optical port attributes

Depend on the optical module. For details, see GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, GE-DWDM eSFP Optical Modules, GE SFP Copper Modules, 10GE SFP+ Optical Modules, and 10GE-CWDM SFP+ Optical Modules.

25GE SFP28 optical port

The S7X08000 provides 25GE SFP28 optical ports to transmit and receive service data at 25 Gbit/s, 10 Gbit/s, or 1 Gbit/s. Table 9-153 lists the attributes of a 25GE SFP28 optical port.

  • The 25GE SFP28 optical ports support 25GE optical modules, SFP28 copper cables (1 m, 3 m, and 5 m; SFP28 to SFP28), SFP28 AOC cables (3 m, 5 m, 7 m, and 10 m; SFP28 to SFP28), GE optical modules, GE copper modules, 10GE SFP+ optical modules, SFP+ copper cables (1 m, 3 m, 5 m, and 10 m; SFP+ to SFP+), and AOC cables (3 m and 10 m; SFP+ to SFP+).
  • When a 25GE optical module or cable is connected to a 25GE SFP28 optical port, the port can automatically adjust its rate to 25 Gbit/s.
  • When a 10GE optical module or cable is connected to a 25GE SFP28 optical port, the port can automatically adjust its rate to 10 Gbit/s.
  • Before installing a GE optical module or copper module on a 25GE SFP28 optical port, run the port mode ge command to configure the port to work at 1 Gbit/s.

Table 9-153 Attributes of a 25GE SFP28 optical port

Attribute

Description

Connector type

LC/PC

Optical port attributes

Depend on the optical module. For details, see 25GE SFP28 Optical Modules, GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, GE-DWDM eSFP Optical Modules, GE SFP Copper Modules, 10GE SFP+ Optical Modules, and 10GE-CWDM SFP+ Optical Modules.

Technical Specifications

Table 9-154 Technical specifications

Item

Description

Physical specifications

  • Dimensions (H x W x D): 40 mm x 100 mm x 208 mm (1.57 in. x 3.94 in. x 8.19 in.)
  • Weight: 0.44 kg (0.97 lb)
  • Maximum power consumption: 33 W

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 9-155 provides the S7X08000 ordering information.

Table 9-155 Ordering information

Card Description

Card Model

Part Number

8-port 10GE SFP+ optical interface card

S7X08000

02312URW

Translation
Download
Updated: 2020-02-17

Document ID: EDOC1000013597

Views: 831855

Downloads: 17858

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next