No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DC Power Cable (Quick-Connect Cord End Terminal)

DC Power Cable (Quick-Connect Cord End Terminal)

Appearance and Structure

Figure 9-25 shows the appearance of a DC power cable.

Figure 9-25 Appearance of a DC power cable

Figure 9-26 shows the structure of a DC power cable.

Figure 9-26 Structure of a DC power cable

Pin Assignments

Table 9-13 lists the pin assignments of a DC power cable.

Table 9-13 Pin assignments of a DC power cable




2 female

Cord end terminal 4^2 grey

Cord end terminal 4^2 grey


A DC power cable (with quick-connect and cord end terminals) is connected a DC power module with a quick-connect socket as follows:

  • The X1 connector is connected to the power socket on the DC power module.
  • The X2/X3 cord end terminal is connected to an external power module.
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 557211

Downloads: 14261

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next