No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES5D00X4SA00 (4-Port GE SFP/10GE SFP+ Front Optical Interface Card)

ES5D00X4SA00 (4-Port GE SFP/10GE SFP+ Front Optical Interface Card)

Version Mapping

Table 8-37 lists the mapping between the ES5D00X4SA00 card and software versions.

Table 8-37 Version mapping

Card Model

Software Version
After the display device command is executed, the PCB model of the card is displayed as ES510X4SA.
V100R006C01 to V200R005C02
This module is not supported in V200R003C02 or V200R003C10.

Card Overview

The ES5D00X4SA00 provides four 10GE SFP+ optical ports for data access and line-rate switching. It can be installed in a card slot of the switch models listed in Table 8-38.

Table 8-38 Applicable switch models
Card Switch Model
  • S5700-28C-HI
  • S5700-28C-HI-24S

Figure 8-18 shows the appearance of the ES5D00X4SA00.

Figure 8-18 ES5D00X4SA00


Table 8-39 describes of the ES5D00X4SA00.

Table 8-39 Functions



Basic function

Provides four 10GE SFP+ optical ports respectively for data access and line-rate switching.

Enhanced service

The S5700-HI powers on or off the ES5D00X4SA00, detects whether the ES5D00X4SA00 is installed or not, and manages PHY chips and optical ports on the ES5D00X4SA00. They provide hardware-based OAM and BFD for the switch.

Hot swapping


Service ports for stacking

The service ports on the ES5D00X4SA00 can be used as stack ports on an S5700-HI switch.
The S5700-HI has supported service port-based stacking since V200R003C00.

Indicators and Ports

Figure 8-19 shows indicators on the ES5D00X4SA00.

Figure 8-19 Indicators on the ES5D00X4SA00

Table 8-40 shows indicators on the ES5D00X4SA00.

Table 8-40 Indicator description








  • Steady on: A link is established on the port.
  • Blinking: The port is sending or receiving data.


No link is established on the port.

Figure 8-20 shows ports on the ES5D00X4SA00.

Figure 8-20 Ports on the ES5D00X4SA00

1. Four 10GE SFP+ optical ports

10GE SFP+ optical port

The ES5D00X4SA00 provides four 10GE optical ports (GE/10GE auto-sensing) respectively to transmit and receive Ethernet service data at 1 Gbit/s or 10 Gbit/s. Table 8-41 describes attributes of an SFP+ optical port.

The 10GE SFP+ optical ports support 10GE SFP+ optical modules, GE optical modules, GE copper modules (in V200R002C00 and later versions, used with shielded twisted pair cables), SFP+ cables (in V200R002C00 and later versions), and AOC cables (in V200R003C00 and later versions).
Table 8-41 Attributes of a 10GE SFP+ optical port
Attribute Description
Connector type LC/PC
Optical port attributes Depend on the optical module used (see GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, GE-DWDM eSFP Optical Modules, GE SFP Copper Modules, 10GE SFP+ Optical Modules, and 10GE-CWDM SFP+ Optical Modules)
Standards compliance IEEE 802.3ae

Technical Specifications

Table 8-42 lists technical specifications of the ES5D00X4SA00.

Table 8-42 Specifications of the ES5D00X4SA00



Physical specifications

  • Dimensions (H x W x D): 23 mm x 77 mm x 207 mm (0.9 in. x 3.0 in. x 8.1 in.)
  • Weight: 0.5 kg (1.10 lb)
  • Maximum power consumption: 10 W

Environment specifications

  • Operating temperature: -5°C to +55°C (23°F to 131°F)
  • Relative humidity: 5% to 95%
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-43 provides the ES5D00X4SA00 ordering information.

Table 8-43 Ordering information

Card Description

Card Name

Part Number
4-port GE SFP or 10GE SFP+ optical interface card (front card) ES5D00X4SA00 03021JYM
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 563519

Downloads: 14373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next