Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-10G-ER-1310
Table 10-67 SFP-10G-ER-1310 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | SFP-10G-ER-1310 |
| Part Number | 02311RLX |
| Model | SFP-10G-ER-1310 |
| Form factor | SFP+ |
| Application standard | Non-standard and compatible with the 10Gbase-ER |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| DDM options | Supported |
| Transmission rate [bit/s] | 10 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 40 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1310 nm |
| Maximum Tx optical power [dBm] | 4.0 dBm |
| Minimum Tx optical power [dBm] | -2.0 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -20 dBm |
| Overload power [dBm] | -7.0 dBm |
NOTE:
If an SFP-10G-ER-1310 optical module is connected to a 10GBase-ER optical module (1550 nm, 10GE, 40 km), the maximum transmission distance is only 20 km due to different specifications such as the wavelength and receiver sensitivity. |
|
This module can only be used on a switch running V200R010C00 or a later version.