No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
S5700-10P-PWR-LI-AC

S5700-10P-PWR-LI-AC

Version Mapping

Table 4-10 lists the mapping between the S5700-10P-PWR-LI-AC chassis and software versions.

Table 4-10 Version mapping

Series

Model

Software Version
S5700-LI S5700-10P-PWR-LI-AC V200R002C00 to V200R012C00 versions
NOTE:
This model does not match V200R001C01, V200R003C02, V200R003C10, V200R005C00SPC500, V200R005C01, V200R005C02, V200R005C03, or V200R007C10.

Appearance and Structure

Figure 4-5 S5700-10P-PWR-LI-AC appearance
1 Eight PoE+ 10/100/1000BASE-T ports 2 Two 1000BASE-X ports
3 One mini USB port 4 One console port
5 Ground screw
NOTE:
It is used with a ground cable.
6 AC socket
NOTE:

It is used with an AC power cable.

7 Jack for AC power cable locking strap
NOTE:
The AC power cable locking strap is not delivered with the switch.
- -

Port Description

10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-11 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-11 Attributes of a 10/100/1000BASE-T Ethernet electrical port

Attribute

Description

Connector type

RJ45

Standards compliance

IEEE802.3, IEEE802.3u, IEEE802.3ab

Working mode

10/100/1000 Mbit/s auto-sensing

Maximum transmission distance

100 m

1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 4-12 describes the attributes of a 1000BASE-X Ethernet optical port.
Table 4-12 Attributes of a 1000BASE-X Ethernet optical port

Attribute

Description

Connector type

LC/PC

Optical port attributes

Depend on the module used

Standards compliance

IEEE802.3z

Console port
The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-13.
Table 4-13 Attributes of a console port

Attribute

Description

Connector type

RJ45

Standards compliance

RS-232

Working mode

Duplex Universal Asynchronous Receiver/Transmitter (UART)

Baud rate

9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s

Default value: 9600 bit/s

Mini USB port

The mini USB port is connected to a console for on-site configuration. When both the Mini USB and console port have a cable connected, only the Mini USB port works.

Indicator Description

The S5700-10P-PWR-LI-AC has similar indicators to those of the S5700-28X-PWR-LI-AC, except that the S5700-10P-PWR-LI-AC does not have RPS and STCK indicators and two GE optical ports do not support the Speed mode. For details, see Indicator Description.

Power Supply Configuration

The S5700-10P-PWR-LI-AC has a built-in power module and does not support pluggable power modules. The built-in power module can provide 124 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at. The switch cannot connect to an RPS power supply.

Figure 4-6 shows the power supply mode of a built-in AC PoE power module (PWR). The PWR module receives AC power from an external power source and provides two outputs: 12 V and -53 V. The 12 V output is provided for the chassis, and the -53 V output is provided for PDs.
Figure 4-6 Power supply by a built-in AC PoE power module

L: live wire

N: neutral wire

PGND: protection ground

GND: 12 V reference ground

RTN: -53 V reference ground

Heat Dissipation

The S5700-10P-PWR-LI-AC has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-14 lists technical specifications of the S5700-10P-PWR-LI-AC.

Table 4-14 Technical specifications

Item

Description

Memory (RAM)

256 MB

Flash

200 MB

Mean time between failures (MTBF)

36.89 years

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±6 kV

Power supply surge protection

±6 kV in differential mode, ±6 kV in common mode

Dimensions (H x W x D)

43.6 mm x 320.0 mm x 220.0 mm (1.72 in. x 12.6 in. x 8.7 in.)

Weight (with packaging)

2.3 kg (5.07 lb)

Stack ports

Not supported

RTC

Not supported

RPS

Not supported

PoE

Supported

Rated voltage range

100 V AC to 240 V AC, 50/60 Hz

Maximum voltage range

90 V AC to 264 V AC, 47 Hz to 63 Hz

Maximum power consumption (100% throughput, full PoE)

142.4 W (system power consumption: 18.4 W, PoE: 124 W)

Typical power consumption (30% of traffic load)
  • Tested according to ATIS standard
  • EEE enabled
  • No PoE power consumption

13.51 W

Operating temperature

0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal temperature (27°C, sound power)

Noise-free (no fans)

Relative humidity

5% to 95%, noncondensing

Operating altitude

0-5000 m (0-16404 ft.)

Certification

  • EMC certification
  • Safety certification
  • Manufacturing certification

Part number

02354037
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 559231

Downloads: 14299

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next