No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES5D000X2S00 (2-Port 10GE SFP+ Front Optical Interface Card)

ES5D000X2S00 (2-Port 10GE SFP+ Front Optical Interface Card)

Version Mapping

Table 8-2 lists the mapping between the ES5D000X2S00 card and software versions.

Table 8-2 Version mapping

Card Model

Software Version
ES5D000X2S00
NOTE:
After the display device command is executed, the PCB model of the card is displayed as ES510X2S.
V100R005C01 to V200R005C03
NOTE:
This module is not supported in V200R003C02 or V200R003C10.

Card Overview

The ES5D000X2S00 provides two 10GE SFP+ optical ports for data access and line-rate switching. It can be installed in a front card slot of the switch models listed in Table 8-3.

Table 8-3 Applicable switch models
Card Switch Model
ES5D000X2S00
  • S5700-28C-SI
  • S5700-52C-SI
  • S5700-28C-PWR-SI
  • S5700-52C-PWR-SI
  • S5700-28C-EI
  • S5700-52C-EI
  • S5700-28C-EI-24S
  • S5700-28C-PWR-EI
  • S5700-52C-PWR-EI
  • S5710-28C-LI
  • S5710-52C-LI
  • S5710-28C-PWR-LI
  • S5710-52C-PWR-LI

Figure 8-3 shows the appearance of the ES5D000X2S00.

Figure 8-3 ES5D000X2S00

Functions

Table 8-4 describes functions of the ES5D000X2S00.

Table 8-4 Functions

Function

Description

Basic function

Provides two 10GE SFP+ optical ports for data access and line-rate switching.

10GE port

A 10GE port is often used as an uplink aggregation port on high-bandwidth and high-speed MANs or backbone networks. When an enterprise needs high-quality triple-play service, use the ES5D000X2S00 to provide access ports for downlink devices or networks. Different transmission distances can be supported by using SFP+ optical modules.

Usage Constraints

The ES5D000X2S00 is not hot swappable.

Indicators and Ports

Figure 8-4 shows indicators on the ES5D000X2S00.

Figure 8-4 Indicators on the ES5D000X2S00

Table 8-5 shows indicators on the ES5D000X2S00.

Table 8-5 Indicator description

Number

Indicator

Color

Description

1

ACT/LINK

Green

  • Steady on: A link is established on the port.
  • Blinking: The port is sending or receiving data.

Off

No link is established on the port.

shows the ports on the ES5D000X2S00.

Figure 8-5 Ports on the ES5D000X2S00

1. Two 10GE SFP+ ports

10GE SFP+ port

The ES5D000X2S00 provides two 10GE optical ports to transmit and receive Ethernet service data at 1 Gbit/s or 10 Gbit/s. Table 8-6 describes attributes of a 10GE SFP+ optical port.

NOTE:
When used on the S5710-C-LI, the 10GE SFP+ ports support the 10GE SFP+ and GE SFP optical modules. When used on the S5700-SI, the 10GE SFP+ ports support 10GE SFP+ optical modules, GE optical modules, and GE copper modules (applicable in V200R002C00 and later versions and used with shielded Ethernet cables), SFP+ copper cables (applicable in V200R002C00 and later versions), and AOC cables (applicable in V200R003C00 and later versions). When used on the S5700-EI, the 10GE SFP+ ports support 10GE SFP+ optical modules, SFP+ copper cables (applicable in V200R002C00 and later versions), and AOC cables (applicable in V200R003C00 and later versions).
Table 8-6 Attributes of a 10GE SFP+ optical port
Attribute Description
Connector type LC/PC
Optical port attributes Depend on the optical module used (see GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, GE-DWDM eSFP Optical Modules, GE SFP Copper Modules, 10GE SFP+ Optical Modules, and 10GE-CWDM SFP+ Optical Modules)
Standards compliance IEEE 802.3ae

Technical Specifications

Table 8-7 describes the technical specifications of the ES5D000X2S00.

Table 8-7 Technical specifications

Item

Description

Physical specifications

  • Dimensions (H x W x D): 22 mm x 70 mm x 197 mm (0.87 in. x 2.8 in. x 7.8 in.)
  • Weight: 0.2 kg (0.44 lb)
  • Maximum power consumption: 6.5 W

Environment specifications

  • Operating temperature: 0°C to 50°C (32°F to 122°F)
  • Relative humidity: 5% to 95%
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-8 provides the ES5D000X2S00 ordering information.

Table 8-8 Ordering information

Card Description

Card Name

Part Number
2-port 10GE SFP+ optical interface card (front card) ES5D000X2S00 03020XEV
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 525224

Downloads: 13952

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next