Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-25G-ESR
Table 10-99 SFP-25G-ESR specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | SFP-25G-ESR |
| Part Number | 02313JFQ |
| Model | SFP-25G-ESR |
| Form factor | SFP28 |
| Application standard | 25GBASE-ESR (non-standard) |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| DDM options | Supported |
| Transmission rate [bit/s] | 10/25 Gbit/s |
| Target transmission distance [km] | Multimode fiber (OM3): 0.2 km Multimode fiber (OM4): 0.3 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 2.4 dBm |
| Minimum Tx optical power [dBm] | -4.4 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -10.3 dBm |
| Overload power [dBm] | 2.4 dBm |
NOTE:
When the optical module is used on a 25GE port, you can set the speed to 10 Gbit/s using a command. When the optical module works at 25 Gbit/s, the maximum transmission distance of the optical module depends on the quality of optical fibers. |
|
This module can only be used on a switch running V200R020C10 or a later version.