No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES5D21X08T00 (8-Port 10GBASE-T RJ45 Rear Interface Card)

ES5D21X08T00 (8-Port 10GBASE-T RJ45 Rear Interface Card)

Version Mapping

Table 8-140 lists the mapping between the ES5D21X08T00 and software versions.

Table 8-140 Version mapping

Card Model

Software Version
ES5D21X08T00

V200R012C00 and later versions

Card Overview

The ES5D21X08T00 provides eight 10GBASE-T RJ45 ports for data access and line-rate switching. It can be installed in a rear card slot of the switch models listed in Table 8-141.

Table 8-141 Applicable switch models
Card Switch Model
ES5D21X08T00
  • S5730-36C-HI
  • S5730-44C-HI (can be installed only in slot 1)
  • S5730-36C-PWH-HI
  • S5730-44C-PWH-HI (can be installed only in slot 1)
  • S5730-60C-HI
  • S5730-68C-HI (can be installed only in slot 1)
  • S5730-60C-PWH-HI
  • S5730-68C-PWH-HI (can be installed only in slot 1)
  • S5730-44C-HI-24S (can be installed only in slot 1)
  • S5730-36C-HI-24S
  • S5730-60C-HI-48S
  • S5730-68C-HI-48S (can be installed only in slot 1)

Figure 8-63 shows the appearance of the ES5D21X08T00.

Figure 8-63 ES5D21X08T00

Functions

Table 8-142 describes functions of the ES5D21X08T00.

Table 8-142 Functions

Function

Description

Basic function

Provides eight 10GE RJ45 ports for data access and line-rate switching.

Hot swapping

Supported

Service ports for stacking The service ports on the card can be used as stack ports.

Indicators and Ports

Figure 8-64 shows indicators on the ES5D21X08T00.

Figure 8-64 Indicators on the ES5D21X08T00

Table 8-143 shows indicators on the ES5D21X08T00.

Table 8-143 Indicator description

No.

Indicator

Color

Description

1

STAT

Off

The system software is not running.

Green

  • Fast blinking: The system is starting.
  • Slow blinking: The system is running properly.

Red

A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.

2

ACT/LINK

Off

No link is established on the port.

Green

Steady on: A link has been established on the port.

Blinking: The port is transmitting or receiving data.

Figure 8-65 shows the ports on the ES5D21X08T00.

Figure 8-65 Ports on the ES5D21X08T00

1. Eight 10GBASE-T RJ45 ports

10GBASE-T RJ45 port

The ES5D21X08T00 provides eight 10GBASE-T RJ-45 electrical ports. The first four electrical ports support only 10 Gbit/s. The last four electrical ports support only 10 Gbit/s in versions earlier than V200R019C00, and also support 100 Mbit/s and 1000 Mbit/s in auto-negotiation mode in V200R019C00 and later versions. When the ports work at 10 Gbit/s, Category 6A shielded Ethernet cables are recommended. Table 8-144 lists the attributes of a 10GBASE-T RJ45 port.

Table 8-144 Attributes of a 10GBASE-T RJ45 port
Attribute Item
Connector type RJ45
Standards compliance IEEE802.3an, IEEE802.3az
Table 8-145 lists the maximum transmission distances of different cables on 10GBASE-T RJ45 ports.
Table 8-145 Maximum transmission distances of different cables on 10GBASE-T RJ45 ports

Cable Type (6-a-1 Bundle)

10GBASE-T RJ45 Port
Cat6A U/UTP Not supported
Cat6A F/UTP 100 m
Cat6A STP 100 m
Cat7 100 m
NOTE:
6-a-1 stands for the six-around-one cable bundle mode, with one cable in the center and six cables bundled evenly around it.

Technical Specifications

Table 8-146 lists technical specifications of the ES5D21X08T00.

Table 8-146 Technical specifications

Item

Description

Physical specifications

  • Dimensions (H x W x D): 40 mm x 100 mm x 208 mm (1.6 in. x 3.9 in. x 8.2 in.)
  • Weight: 0.26 kg (0.57 lb)
  • Maximum power consumption: 22.1 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Relative humidity: 5% RH to 95% RH
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-147 provides the ES5D21X08T00 ordering information.

Table 8-147 Ordering information

Card Description

Card Model

Part Number
8-port 10GBASE-T RJ45 rear interface card ES5D21X08T00 98010736
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 525023

Downloads: 13952

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next