No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES5D21Q04Q01 (4-Port 40 Gig QSFP+ Rear Interface Card)

ES5D21Q04Q01 (4-Port 40 Gig QSFP+ Rear Interface Card)

Version Mapping

Table 8-98 lists the mapping between the ES5D21Q04Q01 card and software versions.

Table 8-98 Version mapping

Card Model

Software Version
ES5D21Q04Q01

V200R011C10 and later versions

Card Overview

The ES5D21Q04Q01 provides four 40GE QSFP+ optical ports for data access and line-rate switching.

The ES5D21Q04Q01 can be installed in a rear card slot of the switch models listed in Table 8-99.

Table 8-99 Applicable switch models
Card Switch Model
ES5D21Q04Q01
  • S5730-48C-SI-AC
  • S5730-48C-PWR-SI-AC
  • S5730S-48C-EI-AC
  • S5730S-48C-PWR-EI
  • S5730-68C-SI-AC
  • S5730S-68C-EI-AC
  • S5730-68C-PWR-SI-AC
  • S5730-68C-PWR-SI
  • S5730S-68C-PWR-EI
Figure 8-45 ES5D21Q04Q01

Functions

Table 8-100 describes functions of the card.

Table 8-100 Functions

Function

Description

Basic functions

Provides four 40GE QSFP+ optical ports for data access and line-rate switching. Each 40GE port can be split into four 10GE ports.

Hot swapping

Supported

Service port stacking

Ports on the card can be used as stack ports.
NOTE:
A 40GE port cannot be used as a stack port after it is split into four 10GE ports.

Indicators and Ports

Figure 8-46 Indicators on the ES5D21Q04Q01

Table 8-101 Description of indicators on the card

Number

Indicator

Color

Description

1

STAT

Off

The system software is not running.

Green

  • Fast blinking: The system is starting.
  • Slow blinking: The system is running normally.

Red

A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.

2

ACT/LINK

Green

  • Steady on: A link has been established on the port.
  • Blinking: The port is transmitting or receiving data.

Off

No link is established on the port.

Figure 8-47 Ports on the ES5D21Q04Q01

1. Four 40GE QSFP+ optical ports

40GE QSFP+ optical port

A 40GE QSFP+ optical port sends and receives service traffic at 40 Gbit/s and can be split into four 10GE ports. After a split, the 40GE QSFP+ optical port needs to be connected to a remote device using a 1-to-4 QSFP+ fiber (with matching optical modules), a 1-to-4 QSFP+ AOC cable (applicable in V200R009C00 and later versions), or a 1-to-4 QSFP+ copper cable. Table 8-102 lists the attributes of a 40GE QSFP+ optical port.

NOTE:
All the optical ports on the card support only QSFP+ optical modules, QSFP+ AOC cables (applicable in V200R009C00 and later versions; 10 m; QSFP+ to QSFP+ or QSFP+ to 4*SFP+), and QSFP+ copper cables (1 m, 3 m, and 5 m; QSFP+ to QSFP+ or QSFP+ to 4*SFP+).
Table 8-102 Attributes of a QSFP+ optical port
Attribute Description
Connector type LC/MPO
Optical port attributes Depend on the optical module used (see 40GE QSFP+ Optical Modules)
Standards compliance IEEE 802.3ba

Technical Specifications

Table 8-103 Technical specifications

Item

Description

Physical specifications

  • Dimensions (H x W x D): 40 mm x 100 mm x 208 mm (1.6 in. x 3.9 in. x 8.2 in.)
  • Weight: 0.5 kg (1.10 lb)
  • Maximum power consumption: 18.83 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Relative humidity: 5% RH to 95% RH
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
NOTE:
When an ES5D21Q04Q01 card on the S5730-SI or S5730S-EI has a 40 km QSFP+ optical module installed, the operating temperature must be in the range of 0°C to 40°C.

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-104 Ordering information

Card Description

Card Name

Part Number
4-port 40 Gig QSFP+ interface card ES5D21Q04Q01 03022RRP
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 521751

Downloads: 13933

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next