No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES5D21X02S00 (2-Port GE SFP/10GE SFP+ Rear Optical Interface Card)

ES5D21X02S00 (2-Port GE SFP/10GE SFP+ Rear Optical Interface Card)

Version Mapping

Table 8-65 lists the mapping between the ES5D21X02S00 card and software versions.

Table 8-65 Version mapping

Card Model

Software Version
ES5D21X02S00 V200R001C00 to V200R005C02
NOTE:
This module is not supported in V200R001C01, V200R003C02, V200R003C10, or V200R005C01.

Card Overview

The ES5D21X02S00 provides two 10GE SFP+ optical ports for data access and line-rate switching. It can be installed in a card slot of the switch models listed in Table 8-66.

Table 8-66 Applicable switch models
Card Switch Model
ES5D21X02S00
  • S5710-52C-PWR-EI
  • S5710-52C-PWR-EI-AC
  • S5710-28C-PWR-EI-AC
  • S5710-52C-EI
  • S5710-28C-EI

Figure 8-30 shows the appearance of the ES5D21X02S00.

Figure 8-30 ES5D21X02S00

Functions

Table 8-67 describes functions of the ES5D21X02S00.

Table 8-67 Functions

Function

Description

Basic function

Provides two 10GE SFP+ optical ports for data access and line-rate switching.

Hot swapping

Supported

Service port supporting the stack function

The ES5D21X02S00 can be used on the stack port of the switch.

Indicators and Ports

Figure 8-31 shows indicators on the ES5D21X02S00.

Figure 8-31 Indicators on the ES5D21X02S00

Table 8-68 describes indicators on the ES5D21X02S00.

Table 8-68 Indicator description

Number

Indicator

Color

Description

1

ACT/LINK

Green

  • Steady on: A link is established on the port.
  • Blinking: The port is sending or receiving data.

Off

No link is established on the port.

Figure 8-32 shows ports on the ES5D21X02S00.

Figure 8-32 Ports on the ES5D21X02S00

1. Two 10GE SFP+ optical ports

10GE SFP+ optical port

The ES5D21X02S00 provides two 10GE optical ports (auto-sensing GE ports) to transmit and receive Ethernet service data at 1 Gbit/s or 10 Gbit/s. Table 8-69 describes attributes of an SFP+ optical port.

NOTE:
The optical ports on the ES5D21X02S00 support 10GE SFP+ optical modules, GE SFP optical modules, GE copper modules (in V200R002C00 and later versions, used with shielded twisted pair cables), SFP+ copper cables (in V200R002C00 and later versions), and AOC cables (in V200R003C00 and later versions).
Table 8-69 Attributes of a 10GE SFP+ optical port
Attribute Description
Connector type LC/PC
Optical port attributes Depend on the optical module used (see GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, GE-DWDM eSFP Optical Modules, GE SFP Copper Modules, 10GE SFP+ Optical Modules, and 10GE-CWDM SFP+ Optical Modules)
Standards compliance IEEE 802.3ae

Technical Specifications

Table 8-70 lists technical specifications of the ES5D21X02S00.

Table 8-70 Technical specifications

Item

Description

Physical specifications

  • Dimensions (H x W x D): 23 mm x 77 mm x 207 mm (0.9 in. x 3.0 in. x 8.1 in.)
  • Weight: 0.5 kg (1.10 lb)
  • Maximum power consumption: 7 W

Environment specifications

  • Operating temperature: 0°C to 50°C (32°F to 122°F)
  • Relative humidity: 5% RH to 95% RH
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-71 provides the ES5D21X02S00 ordering information.

Table 8-71 Ordering information

Card Description

Card Name

Part Number
2-port GE SFP or 10GE SFP+ optical interface card (rear card) ES5D21X02S00 03021NTU
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 521056

Downloads: 13924

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next