Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSFP-GE-FE-BIDI2
Table 10-35 CSFP-GE-FE-BIDI2 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | CSFP-GE-FE-BIDI2 |
| Part Number | 02310WRR |
| Model | CSFP-GE-FE-BIDI2 |
| Form factor | CSFP |
| Application standard | Non-standard |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| DDM options | Supported |
| Transmission rate [bit/s] | 100 Mbit/s 1 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 20 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1310 nm (RX) 1490 nm (TX) |
| Maximum Tx optical power [dBm] | -3.0 dBm |
| Minimum Tx optical power [dBm] | -9.0 dBm |
| Minimum extinction ratio [dB] | 6.6 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -23 dBm |
| Overload power [dBm] | -3.0 dBm |
NOTE:
A CSFP optical module is incorrectly installed on an unsupported switch. As a result, you cannot check whether the optical module is in position. |
|