No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES5D21Q02Q00 (2-Port 40 Gig QSFP+ Rear Interface Card)

ES5D21Q02Q00 (2-Port 40 Gig QSFP+ Rear Interface Card)

Version Mapping

Table 8-85 lists the mapping between the ES5D21Q02Q00 and software versions.

Table 8-85 Version mapping

Card Model

Software Version
ES5D21Q02Q00

V200R012C00 and later versions

Card Overview

The ES5D21Q02Q00 provides two 40GE QSFP+ optical ports for data access and line-rate switching.

The ES5D21Q02Q00 can be installed in a rear card slot of the switch models listed in Table 8-86.

Table 8-86 Applicable switch models
Card Switch Model
ES5D21Q02Q00
  • S5730-36C-HI
  • S5730-36C-PWH-HI
  • S5730-44C-HI (can be installed only in slot 1)
  • S5730-44C-PWH-HI (can be installed only in slot 1)
  • S5730-60C-HI
  • S5730-60C-PWH-HI
  • S5730-68C-HI (can be installed only in slot 1)
  • S5730-68C-PWH-HI (can be installed only in slot 1)
  • S5730-44C-HI-24S (can be installed only in slot 1)
  • S5730-36C-HI-24S
  • S5730-60C-HI-48S
  • S5730-68C-HI-48S (can be installed only in slot 1)

Figure 8-39 shows the appearance of the ES5D21Q02Q00.

Figure 8-39 ES5D21Q02Q00

Functions

Table 8-87 describes functions of the ES5D21Q02Q00.

Table 8-87 Functions

Function

Description

Basic functions

Provides two 40GE QSFP+ optical ports for data access and line-rate switching. Each 40GE port can be split into four 10GE ports.

Hot swapping

Supported

Service port stacking

Ports on the card can be used as stack ports.
NOTE:
A 40GE port cannot be used as a stack port after it is split into four 10GE ports.

Indicators and Ports

Figure 8-40 shows indicators on the ES5D21Q02Q00.

Figure 8-40 Indicators on the ES5D21Q02Q00

Table 8-88 describes indicators on the ES5D21Q02Q00.

Table 8-88 Indicator description

Number

Indicator

Color

Description

1

STAT

Off

The system software is not running.

Green

  • Fast blinking: The system is starting.
  • Slow blinking: The system is running normally.

Red

A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.

2

LINK

Off

No link is established on the port.

Green

Steady on: A link is established on the port.
ACT

Off

The port is not transmitting or receiving data.
Yellow Blinking: The port is transmitting or receiving data.

Figure 8-41 shows the ports on the ES5D21Q02Q00.

Figure 8-41 Ports on the ES5D21Q02Q00

1. Two 40GE QSFP+ optical ports

40GE QSFP+ optical port

A 40GE QSFP+ optical port sends and receives service traffic at 40 Gbit/s and can be split into four 10GE ports. After a split, the 40GE QSFP+ optical port needs to be connected to a remote device using a 1-to-4 QSFP+ fiber (with matching optical modules), a 1-to-4 QSFP+ AOC cable, or a 1-to-4 QSFP+ copper cable. Table 8-89 lists the attributes of a 40GE QSFP+ optical port.

NOTE:
Both optical ports on the ES5D21Q02Q00 support only QSFP+ optical modules, QSFP+ AOC cables (10 m; QSFP+ to QSFP+ or QSFP+ to 4*SFP+), and QSFP+ copper cables (1 m, 3 m, and 5 m; QSFP+ to QSFP+ or QSFP+ to 4*SFP+).
Table 8-89 Attributes of a QSFP+ optical port
Attribute Description
Connector type LC/MPO
Optical attributes Depend on the optical module used (see 40GE QSFP+ Optical Modules)
Standards compliance IEEE 802.3ba

Technical Specifications

Table 8-90 lists technical specifications of the ES5D21Q02Q00.

Table 8-90 Technical specifications

Item

Description

Physical specifications

  • Dimensions (H x W x D): 40 mm x 100 mm x 208 mm (1.6 in. x 3.9 in. x 8.2 in.)
  • Weight: 0.92 kg (2.03 lb)
  • Maximum power consumption: 9 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Relative humidity: 5% to 95%
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-91 provides the ES5D21Q02Q00 ordering information.

Table 8-91 Ordering information

Card Description

Card Model

Part Number
2-port 40 Gig QSFP+ rear interface card ES5D21Q02Q00 03024EHT
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000013597

Views: 516877

Downloads: 13878

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next