ES5D21Q02Q00 (2-Port 40 Gig QSFP+ Rear Interface Card)
Version Mapping
Table 8-85 lists the mapping between the ES5D21Q02Q00 and software versions.
Card Overview
The ES5D21Q02Q00 provides two 40GE QSFP+ optical ports for data access and line-rate switching.
The ES5D21Q02Q00 can be installed in a rear card slot of the switch models listed in Table 8-86.
Card |
Switch Model |
|---|---|
ES5D21Q02Q00 |
|
Functions
Table 8-87 describes functions of the ES5D21Q02Q00.
Function |
Description |
|---|---|
Basic functions |
Provides two 40GE QSFP+ optical ports for data access and line-rate switching. Each 40GE port can be split into four 10GE ports. |
Hot swapping |
Supported |
Service port stacking |
Ports on the card can be used as stack ports. NOTE:
A 40GE port cannot be used as a stack port after it is split into four 10GE ports. |
Indicators and Ports
Table 8-88 describes indicators on the ES5D21Q02Q00.
Number |
Indicator |
Color |
Description |
|---|---|---|---|
1 |
STAT |
Off |
The system software is not running. |
Green |
|
||
Red |
A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. |
||
2 |
LINK |
Off |
No link is established on the port. |
Green |
Steady on: A link is established on the port. |
||
ACT |
Off |
The port is not transmitting or receiving data. |
|
Yellow |
Blinking: The port is transmitting or receiving data. |
1. Two 40GE QSFP+ optical ports |
40GE QSFP+ optical port
A 40GE QSFP+ optical port sends and receives service traffic at 40 Gbit/s and can be split into four 10GE ports. After a split, the 40GE QSFP+ optical port needs to be connected to a remote device using a 1-to-4 QSFP+ fiber (with matching optical modules), a 1-to-4 QSFP+ AOC cable, or a 1-to-4 QSFP+ copper cable. Table 8-89 lists the attributes of a 40GE QSFP+ optical port.
Both optical ports on the ES5D21Q02Q00 support only QSFP+ optical modules, QSFP+ AOC cables (10 m; QSFP+ to QSFP+ or QSFP+ to 4*SFP+), and QSFP+ copper cables (1 m, 3 m, and 5 m; QSFP+ to QSFP+ or QSFP+ to 4*SFP+).
Attribute |
Description |
|---|---|
Connector type |
LC/MPO |
Optical attributes |
Depend on the optical module used (see 40GE QSFP+ Optical Modules) |
Standards compliance |
IEEE 802.3ba |
Technical Specifications
Table 8-90 lists technical specifications of the ES5D21Q02Q00.
Ordering Information
Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.
Table 8-91 provides the ES5D21Q02Q00 ordering information.