No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5700 Series Switches Hardware Description

This document provides an overall description of the S5700 hardware, helping you obtain detailed information about each chassis, card, power module, fan module, cable, and optical module.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Copper Cable

Copper Cable

Types of Copper Cables

Table 9-19 shows the types of copper cables.

Table 9-19  Types of copper cables

Model

Length

Electrical attribute

Bend Radius

Connector Type

Part Number

SFP-10G-CU1M 1 m Passive 25 mm SFP+ to SFP+ 02310MUN
SFP-10G-CU3M 3 m Passive 25 mm SFP+ to SFP+ 02310MUP
SFP-10G-CU5M 5 m Passive 30 mm SFP+ to SFP+ 02310QPR
SFP-10G-AC10M 10 m Active 25 mm SFP+ to SFP+ 02310MUQ
QSFP-40G-CU1M 1 m Passive 35 mm QSFP+ to QSFP+ 02310MUG
QSFP-40G-CU3M 3 m Passive 40 mm QSFP+ to QSFP+ 02310MUH
QSFP-40G-CU5M 5 m Passive 45 mm QSFP+ to QSFP+ 02310MUJ
QSFP-4SFP10G-CU1M 1 m Passive 25 mm QSFP+ to 4*SFP+ 02310MUK
QSFP-4SFP10G-CU3M 3 m Passive 25 mm QSFP+ to 4*SFP+ 02310MUL
QSFP-4SFP10G-CU5M 5 m Passive 30 mm QSFP+ to 4*SFP+ 02310MUM

The two ends of a copper cable must be covered by electrostatic discharge (ESD) caps.

When used for data transmission between service ports, copper cables can only connect Huawei switches of the same subseries. These copper cables cannot be used between Huawei switches of different subseries or between Huawei switches and other devices such as PCs, hosts, servers, or routers.

Appearance and Structure

Figure 9-38 shows the appearance of an SFP/SFP+ copper cable.

Figure 9-38  Appearance of an SFP/SFP+ copper cable

Figure 9-39 shows the appearance of a QSFP+ copper cable.

Figure 9-39  Appearance of a QSFP+ copper cable

Figure 9-40 shows the appearance of a QSFP+ to 4*SFP+ copper cable.

Figure 9-40  Appearance of a QSFP+ to 4*SFP+ copper cable

Figure 9-41 shows the structure of an SFP/SFP+ copper cable.

Figure 9-41  Structure of an SFP/SFP+ copper cable

Figure 9-42 shows the structure of a QSFP+ copper cable.

Figure 9-42  Structure of a QSFP+ copper cable

Front view:


Rear view:


Figure 9-43 shows the structure of a QSFP+ to 4*SFP+ copper cable.

Figure 9-43  Structure of a QSFP+ to 4*SFP+ copper cable

Stack Description

In addition to data transmission, copper cables can be used for stack connection.

Before setting up a stack, familiarize yourself with the device-supported stack connection modes and software and hardware requirements. For details, see "Determining the Stack Connection Support and Mode" under "Typical Stack Configuration of Fixed Switches" in the Typical Configuration Examples.

Translation
Download
Updated: 2019-05-16

Document ID: EDOC1000013597

Views: 418197

Downloads: 12562

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next