S5735-L24T4S-QA1
Overview
Item | Details |
---|---|
Description | S5735-L24T4S-QA1 (24*10/100/1000BASE-T ports, 4*GE SFP ports, AC power, Fanless) |
Part Number | 98011585 |
Model | S5735-L24T4S-QA1 |
First supported version | V200R021C00 |
Components
1 |
Twenty-four 10/100/1000BASE-T ports |
2 |
Four 1000BASE-X ports |
3 |
One console port |
4 |
One PNP button NOTICE:
To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. |
5 |
Ground screw NOTE:
It is used with a ground cable. |
6 |
Jack for AC power cable locking strap NOTE:
The AC power cable locking strap is not delivered
with the switch. |
7 |
AC socket NOTE:
It is used with an AC power cable. |
- |
- |
Ports
Port | Connector Type | Description | Available Components |
---|---|---|---|
10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | |
1000BASE-X port | SFP | A 1000BASE-X port can send and receive data at 100 or 1000 Mbit/s. |
|
Console port | RJ45 | The console port is connected to a console for on-site configuration. |
Indicators and Buttons
The S5735-L24T4S-QA1 has similar indicators to those on the S5735-L24P4X-A1 except that the S5735-L24T4S-QA1 does not have USB and PoE mode indicators. For details, see the S5735-L24P4X-A1.
Power Supply System
The switch has a built-in AC power module and does not support pluggable power modules.
Heat Dissipation System
The switch has no fans and uses natural heat dissipation.
Technical Specifications
Item | Specification |
---|---|
Dimensions without packaging (H x W x D) [mm(in.)] | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.) |
Dimensions with packaging (H x W x D) [mm(in.)] | 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.) |
Chassis height [U] | 1 U |
Weight without packaging [kg(lb)] | 3.69 kg (8.14 lb) |
Weight with packaging [kg(lb)] | 4.45 kg (9.81 lb) |
Typical power consumption [W] | 29.8 W |
Typical heat dissipation [BTU/hour] | 101.68 BTU/hour |
Maximum power consumption [W] | 33 W |
Maximum heat dissipation [BTU/hour] | 112.60 BTU/hour |
Static power consumption [W] | 17.4 W |
MTBF [years] | 66.16 years |
MTTR [hours] | 2 hours |
Availability | > 0.99999 |
Noise at normal temperature (acoustic power) [dB(A)] | Noise-free (no fans), < 30 |
Noise at normal temperature (acoustic pressure) [dB(A)] | Noise-free (no fans), < 20 |
Number of card slots | 0 |
Number of power slots | 0 |
Number of fans modules | 0 |
Redundant power supply | Not supported |
Long-term operating temperature [°C(°F)] | –5°C to +45°C (23°F to 113°F) at an altitude of 0 to 1800 m (0 to 5905.51 ft.) |
Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). When the following optical modules are used, the device can operate in the temperature range of –5°C to +40°C (23°F to 104°F):
|
Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
Long-term operating altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
Power supply mode | AC built-in |
Rated input voltage [V] | AC input: 100 V AC to 240 V AC, 50/60 Hz |
Input voltage range [V] | AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz |
Maximum input current [A] | 2 A |
Memory | 512 MB |
Flash memory | 512 MB |
Console port | RJ45 |
Eth Management port | Not supported |
USB | Not supported |
RTC | Not supported |
RPS input | Not supported |
Service port surge protection [kV] | Common mode: ±7 kV |
Power supply surge protection [kV] | ±6 kV in differential mode, ±6 kV in common mode |
Ingress protection level (dustproof/waterproof) | IP20 |
Types of fans | None |
Heat dissipation mode | Natural heat dissipation |
Airflow direction | - |
PoE | Not supported |
Certification | EMC certification Safety certification Manufacturing certification |