No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

S6700 Series Switches Hardware Description

This document provides an overall description of the S6700 hardware, helping you obtain detailed information about each chassis, power module, fan module, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding Copper Modules

Understanding Copper Modules

Copper modules are also called RJ45 modules. Unlike optical modules, copper modules do not perform electrical-optical conversion. When two optical interfaces have copper modules installed, the interfaces can be connected using a copper cable. Currently, Huawei offers only GE copper modules with RJ45 interfaces. GE copper modules work with Category 5 network cables, comply with 1000BASE-T (IEEE 802.3ab), and support a maximum transmission distance of 100 m.

Figure 10-16 shows a GE SFP copper module.

Figure 10-16 Appearance of a GE SFP copper module
Updated: 2020-02-17

Document ID: EDOC1000013621

Views: 223229

Downloads: 4029

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next