Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QSFP-40G-LX4
Table 9-84 QSFP-40G-LX4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LX4 |
| Part Number | 02311HNP |
| Model | QSFP-40G-LX4 |
| Form factor | QSFP+ |
| Application standard | 40GBASE-LX4 |
| Connector type | LC |
| Optical fiber type |
|
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| DDM options | Supported |
| Transmission rate [bit/s] | 40 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 2 km Multimode fiber (OM3): 0.15 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1271 nm,1291 nm,1311 nm,1331 nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -7.0 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -11.5 dBm |
| Overload power [dBm] | 2.3 dBm |
NOTE:
When QSFP-40G-LX4 optical modules use multimode optical fibers, the fibers cannot be connected through multiple optical distribution frames (ODFs). |
|