Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QSFP-100G-ER4 (02313HLU)
Table 9-103 QSFP-100G-ER4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-100G-ER4 |
| Part Number | 02313HLU |
| Model | QSFP-100G-ER4 |
| Form factor | QSFP28 |
| Application standard | 100GBASE-ER4 |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| DDM options | Supported |
| Transmission rate [bit/s] | 100 Gbit/s |
| Target transmission distance [km] | Single-mode fiber (G.652): 40 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1295 nm,1300 nm,1304 nm,1309 nm |
| Maximum Tx optical power [dBm] | 2.9 dBm |
| Minimum Tx optical power [dBm] | -2.9 dBm |
| Minimum extinction ratio [dB] | 8 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -20.9 dBm |
| Overload power [dBm] | -3.5 dBm |
NOTE:
The RS-FEC function can be enabled. |
|
This module can only be used on a switch running V200R022C10 or a later version.