No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S6700 Series Switches Hardware Description

This document provides an overall description of the S6700 hardware, helping you obtain detailed information about each chassis, power module, fan module, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-10G-ER-SM1330-BIDI (Single-Fiber-Bidirectional Module)

SFP-10G-ER-SM1330-BIDI (Single-Fiber-Bidirectional Module)

Table 10-41 Technical specifications



Transceiver form factor


Transmission speed


Center wavelength (nm)

Rx: 1270/Tx: 1330

Standards compliance


Connector type


Applicable cable and maximum transmission distance

Single-mode fiber: 40 km

Transmit power (dBm)

0 to 5

Maximum receiver sensitivity (dBm)


Overload power (dBm)


Extinction ratio (dB)


Operating temperature

0°C to 70°C (32°F to 158°F)

Part number


This module can only be used on a switch running V200R009C00 or a later version. A switch running an earlier version may fail to obtain information about this module.

Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example, SFP-10G-ER-SM1330-BIDI must be used with SFP-10G-ER-SM1270-BIDI.

Updated: 2020-02-17

Document ID: EDOC1000013621

Views: 199441

Downloads: 3812

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next