No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S6700 Series Switches Hardware Description

This document provides an overall description of the S6700 hardware, helping you obtain detailed information about each chassis, power module, fan module, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Port Numbering Conventions

Port Numbering Conventions

Physical ports are numbered in the following way:

A single switch uses slot ID/subcard ID/port sequence number to identify physical ports.
  • Slot ID: indicates the slot where the switch is located. The value is 0.
  • Subcard ID: indicates the ID of a subcard.
  • Port sequence number: indicates the sequence number of a port on the switch.
A stacked switch uses Stack ID/subcard ID/port sequence number to identify physical ports.
  • Stack ID: indicates the ID of a stacked switch. The value ranges from 0 to 8.
  • Subcard ID: indicates the ID of a subcard.
  • Port sequence number: indicates the sequence number of a port on the switch.
Table 5-3 Port numbering conventions

Port Numbering Diagram

Description

There are two rows of service ports on the device. These ports are numbered from bottom to top and left to right, starting from 1.

For example, the port on the top left is numbered 0/0/2.

Ports of different speeds are numbered separately. For example, the first 100M port is numbered ethernet 0/0/1, and the first GE port is numbered gigabitethernet 0/0/1. Other 100M and GE ports are numbered in ascending order following the two ports respectively.

Translation
Download
Updated: 2020-02-17

Document ID: EDOC1000013621

Views: 201978

Downloads: 3839

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next