Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QSFP-40G-SR-BD
Table 9-86 QSFP-40G-SR-BD specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-SR-BD |
| Part Number | 02311FPA |
| Model | QSFP-40G-SR-BD |
| Form factor | QSFP+ |
| Application standard | 40GBASE-BIDI (non-standard) |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 10°C to 70°C (50°F to 158°F) Note: When the operating temperature is lower than 10°C (50°F), intermittent disconnection or packet loss may occur on ports. |
| DDM options | Not supported |
| Transmission rate [bit/s] | 40 Gbit/s |
| Target transmission distance [km] | Multimode fiber (OM3): 0.1 km Multimode fiber (OM4): 0.15 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm,900 nm |
| Maximum Tx optical power [dBm] | 5 dBm |
| Minimum Tx optical power [dBm] | -4 dBm |
| Minimum extinction ratio [dB] | 4.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -4.5 dBm |
| Overload power [dBm] | 5 dBm |
NOTE:
The QSFP-40G-SR-BD optical module does not support some digital diagnostic monitoring (DDM) functions. The QSFP-40G-SR-BD optical module does not support unidirectional single-fiber communication. |
|