No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S6700 Series Switches Hardware Description

This document provides an overall description of the S6700 hardware, helping you obtain detailed information about each chassis, power module, fan module, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Copper Cable

Copper Cable

Types of Copper Cables

Table 9-16 shows the types of copper cables.

Table 9-16 Types of copper cables

Model

Length

Electrical attribute

Bend Radius

Connector Type

Part Number

SFP-10G-CU1M

1 m

Passive

25 mm

SFP+ to SFP+

02310MUN

SFP-10G-CU3M

3 m

Passive

25 mm

SFP+ to SFP+

02310MUP

SFP-10G-CU5M

5 m

Passive

30 mm

SFP+ to SFP+

02310QPR

SFP-10G-AC10M

10 m

Active

25 mm

SFP+ to SFP+

02310MUQ

QSFP-40G-CU1M

1 m

Passive

35 mm

QSFP+ to QSFP+

02310MUG

QSFP-40G-CU3M

3 m

Passive

40 mm

QSFP+ to QSFP+

02310MUH

QSFP-40G-CU5M

5 m

Passive

45 mm

QSFP+ to QSFP+

02310MUJ

QSFP-4SFP10G-CU1M

1 m

Passive

25 mm

QSFP+ to 4*SFP+

02310MUK

QSFP-4SFP10G-CU3M

3 m

Passive

25 mm

QSFP+ to 4*SFP+

02310MUL

QSFP-4SFP10G-CU5M

5 m

Passive

30 mm

QSFP+ to 4*SFP+

02310MUM

QSFP28-100G-CU1M

1 m

Passive

70 mm

QSFP28 to QSFP28

02311KNW

QSFP28-100G-CU3M

3 m

Passive

70 mm

QSFP28 to QSFP28

02311KNX

QSFP28-100G-CU5M

5 m

Passive

70 mm

QSFP28 to QSFP28

02311KNY

The two ends of a copper cable must be covered by electrostatic discharge (ESD) caps.

When used for data transmission between service ports, copper cables can only connect Huawei switches of the same subseries. These copper cables cannot be used between Huawei switches of different subseries or between Huawei switches and other devices such as PCs, hosts, servers, or routers.

Appearance and Structure

Figure 9-36 shows the appearance of an SFP/SFP+ copper cable.

Figure 9-36 Appearance of an SFP/SFP+ copper cable

Figure 9-37 shows the appearance of a QSFP+/QSFP28 copper cable.

Figure 9-37 Appearance of a QSFP+/QSFP28 copper cable

Figure 9-38 shows the appearance of a QSFP+ to 4*SFP+ copper cable.

Figure 9-38 Appearance of a QSFP+ to 4*SFP+ copper cable

Figure 9-39 shows the structure of an SFP/SFP+ copper cable.

Figure 9-39 Structure of an SFP/SFP+ copper cable

Figure 9-40 shows the structure of a QSFP+/QSFP28 copper cable.

Figure 9-40 Structure of a QSFP+/QSFP28 copper cable

Front view:


Rear view:


Figure 9-41 shows the structure of a QSFP+ to 4*SFP+ copper cable.

Figure 9-41 Structure of a QSFP+ to 4*SFP+ copper cable

Stack Description

In addition to data transmission, copper cables can be used for stack connection.

Before setting up a stack, familiarize yourself with the device-supported stack connection modes and software and hardware requirements. For details, see "Determining the Stack Connection Support and Mode" under "Typical Stack Configuration of Fixed Switches" in the Typical Configuration Examples.

Translation
Download
Updated: 2020-02-17

Document ID: EDOC1000013621

Views: 199811

Downloads: 3814

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next