No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S6700 Series Switches Hardware Description

This document provides an overall description of the S6700 hardware, helping you obtain detailed information about each chassis, power module, fan module, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Console Cable

Console Cable

Appearance and Structure

Figure 9-32 and Figure 9-33 show the appearance and structure of a console cable.

Figure 9-32 Appearance of a console cable

Figure 9-33 Structure of a console cable

Pin Assignments

Table 9-14 lists the pin assignments of console cable connectors.

Table 9-14 Pin assignments of console cable connectors


X1 (DB9)

X2 (RJ45)

Pin assignment








A console cable connects the console port of the device to the serial port of an operation terminal to transmit configuration data. A shielded cable or an unshielded cable can be used according to the onsite situation.

A console cable connects the device and terminal as follows:

  • The 8-pin RJ45 connector is inserted into the console port of the device.
  • The DB9 connector is inserted into the terminal serial port.
Updated: 2020-02-17

Document ID: EDOC1000013621

Views: 197538

Downloads: 3791

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next