No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX116 Pass-Through Module V100R001 User Guide 16

This document describes the CX116 gigabit Ethernet (GE) pass through module of the Tecal E9000 server (short for E9000) in terms of its features, installation, removal, and maintenance.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Port Connection Status by Using the MM910

Checking Port Connection Status by Using the MM910


This task provides guidance for software commissioning engineers to perform the following operations:

View the port connection status of the CX116 remotely by using the management module.


  1. Use the PuTTY to log in to the active MM910.

    For details, seeLogging In to a Server Over a Network Port by Using PuTTY .

  2. Check the port connection status by running the following command:

    smmget -l swiN -t port_Y -d phystate

    N indicates the slot number of a CX116, in the range of 1 to 4.

    Y indicates a logical port number, in the range of 0 to 31. For details about port naming rules, see 2.3 .

    For example, if the slot number of a CX116 is 1 and the logical port number is 5, run the following command:

    smmget -l swi1 -t port_5 -d phystate

    If port 5 of the CX116 in slot 1E is connected, the command output is as follows:

    link up

Updated: 2018-09-20

Document ID: EDOC1000015889

Views: 12519

Downloads: 487

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next