No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX116 Pass-Through Module V100R001 User Guide 16

This document describes the CX116 gigabit Ethernet (GE) pass through module of the Tecal E9000 server (short for E9000) in terms of its features, installation, removal, and maintenance.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators

Indicators

By observing the indicators, you can determine the current operating status of the CX116.

Table 2-2 Indicators

Indicator

Meaning

Color

Description

PWR indicator

Power indicator

Green

  • Off: The module is not powered on.
  • Blinking green: The module is being powered on.
  • Steady green: The module is working properly.

HLY indicator

Healthy indicator

Red and green

  • Off: The module is not powered on.
  • Steady green: The module is working properly.
  • Blinking red (1 Hz): A major alarm is generated.
  • Blinking red (4 Hz): A critical alarm is generated.
  • Blinking red (5 Hz): The CX116 is not installed properly.
NOTE:

It is difficult to identify the difference between blinking frequencies of 4 and 5 Hz. If the indicator is blinking red quickly, check whether the device has been installed properly and then check whether a critical alarm has been generated.

GE electrical port status indicator

Connection and data transmission status indicator for an Ethernet electrical port

Green

  • Off: The port is not connected or not properly connected.
  • Blinking green: Data is being sent or received over the port.
  • Steady green: The port is properly connected.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015889

Views: 11955

Downloads: 487

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next