No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX116 Pass-Through Module V100R001 User Guide 16

This document describes the CX116 gigabit Ethernet (GE) pass through module of the Tecal E9000 server (short for E9000) in terms of its features, installation, removal, and maintenance.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Architecture

Architecture

The CX116 logical architecture includes the processor module, CPLD module, PHY module, and GE pass through module.

Figure 2-9 Logical architecture
  • Processor module: The processor module, in a dominant frequency of 333 MHz, is the controlling core for the CX116 and supports master/slave and multi-master modes.
  • CPLD module: The CPLD module is a key module to help the processors to collect the CX116 information, and power on, power off, and reset the CX116.
  • PHY module: The PHY module converts the 32 Serdes signals to 32 x 1000 BASE-T signals.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015889

Views: 12369

Downloads: 487

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next