No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX910 Switch Module V100R001C00 User Guide 22

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose GE/10GE switching planes use the software versions of 1.1.x.x.x, and 1.23-1.99.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering On or Off a Switching Plane

Powering On or Off a Switching Plane

Scenarios

Remotely power on the 10GE switching plane of CX910 using the MM910 WebUI.

Use any of the following methods to power on the CX910:

  • Power on all switching planes of the CX910 on the MM910 WebUI. Details are provided later in this topic.
  • On the MM910 CLI, run the powerstate command to power on or off the switching planes of the CX910. For details, see MM910 Management Module V100R001 Command Reference.
  • On the BMC CLI, run the powerstate command to power on or off the switching planes of the CX910. For operation details, see E9000 Server V100R001 iMana 200 User Guide.
  • If the chassis is not powered on, power it on, and all the switching planes of the CX910 will be powered on with the chassis. This topic does not provide the operation details.
  • If the chassis is powered off, the 10GE switching plane of the CX910 is powered off with the chassis.
  • If the chassis is powered on but the CX910 is not installed, install the CX910, and all switching planes of the CX910 are automatically powered on after installation. This topic does not provide the operation details.
  • If the chassis is powered on and the CX910 is installed, remove the CX910 to power off the 10GE switching plane.

Impact on the System

After the 10GE switching plane is powered off, all services that run on the 10GE switching plane stop.

Prerequisites

Conditions

The current configuration data has been saved.

Software

PuTTY.exe is free software. You can download it from the Internet. PuTTY 0.60 or later is required for login over a serial port.

Procedure

  1. Connect the RS–232 serial port on the PC to the serial port marked with SYS on the CX910 panel.
  2. Log in to the MM910 WebUI.

    For details, see Logging In to the MM910 WebUI.

  3. Perform operations based on the MM910 software version.

    • If the MM910 version is (U54) 2.20 or earlier, go to 4.
    • If the MM910 version is later than (U54) 2.20, go to 7.

      You can run the smmget -l smm -d version command on the MM910 CLI to check the software version.

  4. In the navigation tree, choose Power Supply Management > Swi Power Control.

    The Swi Power Control page is displayed.

    Figure 6-4 Swi Power Control page

  5. Power on or off the 10GE switching plane of a specific switch module.

    fabric indicates the 10GE switching plane.

  6. Click Refresh.

    Check the latest power-on and power-off status of the switch module.

    The task is complete.

  7. Choose Pem&Fantray.

    The Pem&Fantray page is displayed.

  8. In the navigation tree on the left of the Pem&Fantray page, choose Power Supply Management > Power Control.

    Figure 6-5 Power Control page

  9. Power on or off the 10GE switching plane of a specific switch module.

    fabric indicates the 10GE switching plane.

  10. Refresh the page and check the latest power-on and power-off status of the switch module.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015891

Views: 14157

Downloads: 335

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next