No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX910 Switch Module V100R001C00 User Guide 22

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose GE/10GE switching planes use the software versions of 1.1.x.x.x, and 1.23-1.99.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the MM910 WebUI

Logging In to the MM910 WebUI


Log in to the HMM WebUI using a browser.

  • If there are five consecutive attempts to log in to the MM910 WebUI with incorrect passwords, the account is locked. It will be automatically unlocked after 10 minutes. If you enter a password within this time, the lock is reset to 10 minutes even if the password is correct.
  • An account can log in to the HMM WebUI only through one IP address at a time. If an account is logged in and then logs in through another IP address, the account will be logged out.
  • "This is the standby MM" is displayed for the WebUI of the standby MM910. The standby MM910 WebUI does not display component installation status. On the WebUI of the standby MM910, you can only view monitoring information about the active MM910, set the DHCP and static IP addresses, and set and query the thresholds and hysteresis of the sensors of the standby MM910. To perform other operations, log in to the WebUI of the active MM910.
  • For details about the operations on the WebUI, see the Online Help.



The client (a PC) used to access the HMM WebUI must meet the requirements listed in Table 6-1.

Table 6-1 Runtime environment requirements

Runtime environment




  • Windows 7 32-bit/64-bit
  • Windows 8 32-bit/64-bit
  • Windows Server 2008
  • Windows Server 2012


Red Hat Enterprise Linux (RHEL) 4.3 to 6.0

Web Browser


  • Internet Explorer 9 or later
  • Mozilla Firefox 19.0 to 31.0
  • Chrome 22.0 to 31.0


Mozilla Firefox 19.0 to 31.0


  • JRE 1.6 or later if the MM910 version is earlier than (U54)5.51
  • JRE 1.7 or later if the MM910 version is (U54)5.51 and later

This task uses Internet Explorer 11 in Windows 7 as an example.


  1. Connect the Ethernet port on the PC to the MGMT port on the active or standby MM910.

    Figure 6-7 shows the network connections.

    Figure 6-7 Network connections
    • For MM910 (U54) 2.25 or earlier, the MM910s communicate with external network devices through the ports on switch modules in slots 2X and 3X by default. For MM910 later than (U54) 2.25, the MM910s communicate with external network devices through their MGMT ports by default. To query the MM910 version, see MM910 Management Module V100R001 User Guide.
    • You can run the outportmode command to change the MM910 management network port connection mode. If the MM910s communicate with external network devices through the switch module ports, do not connect the MM910 MGMT ports and the switch module ports to the same network. Otherwise, a network storm will occur and the network will be interrupted. For details, see MM910 Management Module V100R001 Command Reference.

  2. Set an IP address and a subnet mask or add route information for the PC, and ensure that the PC can properly communicate with the MM910.
  3. Open Internet Explorer, click and choose Internet Options.

    The Internet Options dialog box is displayed.

  4. Choose Connections and click LAN Settings.

    The LAN Settings dialog box is displayed.

  5. In the Proxy server group box, deselect Use a proxy server for your LAN and click OK.

    The LAN Settings dialog box is closed.

  6. Click OK.

    The Internet Options dialog box is closed.

  7. Open Internet Explorer again, enter https://MM910 floating IP address, for example, in the address box, and press Enter.


    You can query or configure the MM910 floating IP address in any of the following ways:

    The message "There is a problem with this website's security certificate" is displayed.

  8. (Optional) Add the MM910 IP address to the Trusted sites zone.

    By default, Internet Explorer enhanced security configuration is enabled on the Windows Server series OSs. Add the MM910 IP address to the trusted sites zone as follows:

    1. On Internet Explorer, choose Tools > Internet Options.

      The Internet Options dialog box is displayed.

    2. Click the Security tab.
    3. Click Trusted sites, and click Sites.
    4. In the Trusted sites dialog box, click Add to add the MM910 IP address to the trusted site list, and click Close.
    5. Refresh the page.
    6. In the status bar of a browser, check whether the MM910 IP address is in the Trusted sites zone.

  9. Click Continue to this website (not recommended).

    The HMM Web login page is displayed.


    The login page varies slightly with the HMM software version.

    Figure 6-8 Logging in to HMM Web of version V603

  10. Set the login parameters.

    • Language: Select the language to be used.
    • User name: Enter the user name. The default user name is root.
    • Password: Enter the password. The default password is Huawei12#$.

      If User must change password at next login is selected when users are created on the LDAP server, logins will fail. Deselect this option on the LDAP server.

    • Log in to: Select This Machine/computer for a local user. If the system manages domain users over Active Directory (AD), select LDAP.

  11. Click Log In.

    The HMM Web home page is displayed.

    Figure 6-9 HMM Web (V603)

Updated: 2018-09-20

Document ID: EDOC1000015891

Views: 15388

Downloads: 341

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next