No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX910 Switch Module V100R001C00 User Guide 22

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose GE/10GE switching planes use the software versions of 1.1.x.x.x, and 1.23-1.99.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Users

Adding Users

Scenarios

You can add users on the switching plane of the CX910. Then the new user can log in to the command-line interface (CLI) of the switching plane to carry out routine maintenance.

A maximum of 550 local users can be configured on the 10GE switching plane of the CX910. The local users are classified as follows:

  • Administrators: have the permissions to query and set information.
  • Operators: have the permission to query information.
  • Common users: have the permission to check information.

Prerequisites

Data

Table 4-10 lists the data to be prepared.

Table 4-10 Required data

Name

User Name and Password Example

Permission Example

10GE switching plane

  • User name: huawei
  • Password: Huawei12#$

Operators

Procedure

  1. Log in to the CLI of the 10GE switching plane.
  2. On the CLI of the 10GE switching plane, run the following command to go to the system view:

    <Fabric> system-view

    The command output is as follows:

    Enter system view, return user view with Ctrl+Z.

  3. Go to the AAA view.

    [Fabric] aaa

  4. Add a local user on the 10GE switching plane.

    local-user User name password cipher Password

    The password is case-sensitive and must meet the following requirements:

    • Contain 6 to 16 characters.
    • Contain at least two types of the following characters:
    • Uppercase letters A to Z
    • Lowercase letters a to z
    • Digits 0 to 9
    • At least one of the following special character: .`~!@#$%^&*()-_=+\|[{}];:'",<.>/
    • Cannot be the same as the user name or the user name in reverse order.

      For example, run the following command to set the user name to huawei and set the password to Huawei12#$ in ciphertext:

      [Fabric-aaa] local-user huawei password cipher Huawei12#$

  5. Assign operator rights to user huawei.

    • Administrators: The value ranges from 3 to 15.
    • Operators: The value is 2.
    • Common users: The value is 1.

      [Fabric-aaa] local-user huawei level 2

  6. Set the access type to SSH.

    [Fabric-aaa] local-user huawei service-type ssh

  7. Run the following command to query the information about all local users and check that the user is successfully created:

    [Fabric-aaa] display local-user

    The following information is displayed:

      ---------------------------------------------------------------------------- 
      User-name                      State  AuthMask  AdminLevel 
      ---------------------------------------------------------------------------- 
      huawei                         A      S         3 
      root                           A      S         15 
      ---------------------------------------------------------------------------- 
      Total 2 user(s)     

  8. Exit from the AAA view.

    [Fabric-aaa] quit

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015891

Views: 14029

Downloads: 333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next