No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX910 Switch Module V100R001C00 User Guide 22

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose GE/10GE switching planes use the software versions of 1.1.x.x.x, and 1.23-1.99.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an FTP Server

Configuring an FTP Server

Scenarios

Configure an FTP server to transfer files from a PC to a switching plane.

Prerequisites

Software

wftpd32.exe: used to transfer files between different platforms, for example, from a PC to a switching plane of a switch module. wftpd32.exe is a piece of third-party free software. Obtain it yourself.

Procedure

  1. Connect the local PC and the target device through a serial cable.
  2. Double-click wftpd32.exe.

    The No log file open - WFTPD window is displayed.

  3. Choose Logging > Log Options.

    The Logging Options dialog box is displayed.

  4. Select all check boxes except Winsock Calls, and click OK.
  5. Choose Security > Users/rights.

    The Users/Rights Security Dialog dialog box is displayed.

  6. Click New User. In the dialog box displayed, enter a new user name (for example, vxworks) and click OK.

    The Change Password dialog box is displayed.

  7. Enter a new password (for example, vxworks) in the New Password and Verify Password text boxes, and click OK.
  8. Copy the upgrade file to a directory (for example, D:\FTP) on the PC.

    NOTE:

    The directory can contain only English characters.

  9. Select huawei from the User Name combo box, and enter the upgrade file directory (for example, D:\FTP) in the Home Directory text box.

    Figure 6-10 Users/Rights Security Dialog

  10. Click Done.

    The FTP server is configured.

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015891

Views: 13981

Downloads: 333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next