No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX910 Switch Module V100R001C00 User Guide 22

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose GE/10GE switching planes use the software versions of 1.1.x.x.x, and 1.23-1.99.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators

Indicators

This topic describes the names, meanings, colors, descriptions and working status of the indicators on the CX910.

By observing the indicators, you can determine the current operating status of the CX910.

Table 2-3 Indicators

Label

Meaning

Color

Description

STAT

Power indicator

Green

  • Off: The CX910 is not powered on.
  • Blinking green: The CX910 is being powered on.
  • Steady green: The CX910 is operating properly.

HLY

Health indicator

Red and green

  • Off: The CX910 is not powered on.
  • Steady green: The CX910 is operating properly or has minor alarms.
  • Blinking red (1 Hz): A major alarm is generated.
  • Blinking red (4 Hz): A critical alarm is generated.
  • Blinking red (5 Hz): The CX910 is not securely installed.
NOTE:

It is difficult to identify the difference between blinking frequencies of 4 Hz and 5 Hz. If the indicator is blinking red quickly, check whether the device has been installed properly and then check whether a critical alarm has been generated.

OFL

Offline button/indicator (reserved)

N/A

N/A

and

Connection status indicator for the 10GE optical port

Green

  • Off: The port is not properly connected.
  • Steady green: The port is properly connected.

and

Data transmission status indicator for the 10GE optical port

Orange

  • Off: No data is being transmitted over the port.
  • Blinking orange: Data is being sent or received over the port.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015891

Views: 14195

Downloads: 335

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next