No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX913 Switch Module V100R001C00 User Guide 22

This document describes the CX913 10GE switch module (CX913 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX913 whose GE/10GE switching planes use the software versions of 1.1.x.x.x, and 1.23-1.99.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Technical Specifications

Technical Specifications

This topic describes the physical, environmental, power, and network switching specifications of the CX913.

Table 2-6 Technical specifications




Physical specifications

Dimensions (H x W x D)

388.55 mm x 35.06 mm x 272.15 mm (15.30 in. x 1.38 in. x 10.71 in.)




3.5 kg

Environmental specifications


  • Operating temperature: 5°C to 40°C (41°F to 104°F) (ASHRAE Class A3 compliant)
  • Storage temperature: -40°C to +65°C (-40°F to +149°F)
  • Long-term storage temperature: 21°C to 27°C (69.8°F to 80.6°F)
  • Temperature change rate < 20°C/h (36°F/h)

Relative humidity

  • Operating humidity: 5% to 85%
  • Storage humidity: 5% to 95%
  • Long-term storage humidity: 30% RH to 69% RH
  • Humidity change rate < 20% RH/h


At an altitude of 900 m (2952.72 ft), the highest operating temperature is 40°C (104°F).

When the device is used at an altitude of 900 m to 5000 m, the highest operating temperature decreases by 1°C (1.8°F) for every increase of 300 m (984.24 ft).

Corrosive air pollutant

  • Corrosion rate of the copper test piece < 300 Å/month (in compliance with the ANSI/ISA-71.04-2013 gaseous corrosion level G1)
  • Corrosion rate of the silver test piece < 200 Å/month

Particulate pollutant

  • The ISO14664-1 Class 8 requirements are met.

    It is recommended that a professional company monitor particulate pollutants in the equipment room.

  • There is no explosive, conductive, magnetic, or corrosive dust in the equipment room.

Input power supply

Rated input voltage

12 V DC

Power consumption

Maximum power consumption

166 W

199.7 W

154 W

Table 2-7 Network switching specifications




Quantity of ports on the panel


  • One BMC serial port and one SYS serial port
  • Sixteen 10GE optical ports
  • Eight 8 Gbit/s FC optical ports

Port rate

  • 10GE switching plane: GE or 10GE
  • FC pass through plane: 8G FC optical ports


Switching capability (throughput)

10GE switching plane: 1.28 Tbit/s

Full duplex mode

MAC address filtering

10GE switching plane: 1024


Capacity of the MAC address table

10GE switching plane: 131072


Quantity of VLANs

10GE switching plane: 4094

Complies with IEEE 802.1Q.

Jumbo frame length (in byte)

9712 byte


Priority queues

10GE switching plane: 8

Complies with IEEE 802.1D.

Updated: 2018-09-20

Document ID: EDOC1000015895

Views: 13573

Downloads: 191

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next