No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Unloading Equipment

Unloading Equipment


Unload the equipment using a method based on the vehicle used to transport the equipment to the site. Table A-5 lists the equipment unloading methods.

Table A-5 Equipment unloading methods

Vehicle Type

Recommended Unloading Method


With a tailgate

Use a pallet truck.

Figure A-13

Without a tailgate

Use a forklift.

Figure A-14


Prepare the following tools before unloading equipment:

  • Crane
  • Rope
  • Forklift
  • Pallet truck
  • Protective gloves

Pallet Truck

Figure A-13 shows how to unload equipment from a vehicle with a tailgate using a pallet truck.

Figure A-13 Unloading equipment using a pallet truck

Note the following when unloading equipment using a pallet truck:

  • Lower the forks of the pallet truck, insert the fork yoke into the middle of the lower surface of the pallet, and lift the pallet truck.
  • Move the pallet truck at a constant speed, and do not stop it suddenly.


Figure A-14 shows how to unload equipment from a vehicle using a forklift.

Figure A-14 Unloading equipment using a forklift

Note the following when unloading equipment using a forklift:

  • Obtain certification authorized by the local government or official authorities before operating a forklift.
  • Do not stand in front of the forklift when it is moving.
  • Adjust the forks of the forklift so that they are in the middle of the lower surface of the pallet to prevent damaging the equipment.
  • Do not suddenly stop, lift, or lower the forks of the forklift.
Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 95651

Downloads: 5268

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next