No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Switch Module Configuration

Verifying the Switch Module Configuration

This section applies only to the CX110, CX111, CX310, CX311, CX312, CX320, CX710, CX910, CX911, CX912, CX913, CX915, CX916, CX916L and CX920.

If the original active switch module restarts due to a power failure after you install a spare switch module, remove the spare switch module, wait until the original active switch module is restarted, and reinstall the spare switch module.

Procedure

  1. Log in to the switch module CLI.
  2. Check whether the switch module configuration is restored successfully.

    • For V5 switch module software, query the configuration that takes effect and the saved configuration. If they are consistent, the configuration is restored successfully.

      display current-configuration and display save-configuration

    • For V8 switch module software, check the configuration restoration result.
      display configuration recover-result
      • The following command output indicates that the configuration is restored successfully:
        <HUAWEI> display configuration  recover-result                                       
        Info: The current startup saved-configuration file is flash:/vrpcfg.zip.         
        The number of failed commands is 0.                                              
             
      • The following command output indicates that the configuration fails to be restored:
        <HUAWEI> display configuration recover-result 
        Warning: Finish configuration recover from flash:/vrpcfg.zip, but some configurations lost.  
        <HUAWEI> display configuration recover-result verbose 
        Warning: Finish configuration recover from flash:/vrpcfg.zip, but some configura 
        tions lost.                                                                      
        -------------------------------------------------------------- 
        Command     : tftp-server acl aclname acl1                                       
        Line number : 543                                                                
        Reason      : Unknown command                                                    
        -------------------------------------------------------------- 
             

        If the configuration fails to be restored, the command output also shows the command line with errors and the cause of errors.

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 95210

Downloads: 5262

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next