No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fan Module Configuration Guidelines

Fan Module Configuration Guidelines

This section describes the guidelines for configuring fan modules if a chassis houses different numbers of compute nodes.

Fan modules in the chassis must have sufficient heat dissipation capabilities to ensure that the compute nodes and the system operate properly.

Figure 2-20 Slot numbers of fan modules

Configure fan modules based on the following guidelines. Otherwise, compute nodes can power off due to insufficient heat dissipation.

Configure fan modules based on the following guidelines:

  • If a chassis houses eight or fewer half-width compute nodes or four or fewer full-width compute nodes, install all fan modules except fan modules 5, 6, 11, and 12.
  • If a chassis houses more than eight half-width compute nodes or more than four full-width compute nodes, install all fan modules.
Translation
Download
Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 96186

Downloads: 5270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next