No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Label Introduction

Label Introduction

This section describes the precautions for installing or replacing labels.

Label Types and Locations

Table A-1 Label types and location

Type

Name

How to Obtain

Equipment label

  • Chassis label
  • Board label

"Equipment Label" in the Engineering Design Document.

Labels of the PGND cable and power cable

  • Label for the chassis power cable
  • Label for the chassis PGND cable

Go to http://support.huawei.com, and download the Label of Contents and printing template.

Signal cable label

  • Label for the Ethernet signal cable
  • Label for the optical cable

"Internal Cable Label" and "External Cable Label" in the Engineering Design Document.

Equipment Labels

Equipment labels include:

  • Chassis label, as shown in Figure A-1.
  • Board label, as shown in Figure A-2.
    Figure A-1 Appearance of a chassis label
    Figure A-2 Appearance of a board label

Labels of the PGND Cable and Power Cable

Figure A-3 Appearance of a label for the chassis power cable

Label Material

The label material is certified by the Underwriters Laboratories Inc. (UL) and Canadian Standards Association (CSA), and has the following requirements:

  • Thickness: 0.09 mm (0.0035 in.)
  • Color: chalk white
  • Material: polyester (PET)
  • Temperature range: –29°C to +149°C (–20.2°F to +300.2°F)
  • Handwriting using a greasy pen and laser printing are allowed.
Translation
Download
Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 95575

Downloads: 5264

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next