No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backing Up the Configuration Files

Backing Up the Configuration Files

Procedure

  1. Log in to the switch module and the MM910 CLI.

    NOTE:

    The default user name and password of the switch module are root and Huawei12#$, respectively.

  2. Obtain the CXxxx Switch Module User Guide at Support > Intelligent Servers > Blade Servers > E9000 Chassis.
  3. Determine the switch module to be replaced.

    Figure 6-26 shows the switch module slot numbers.
    NOTE:

    If the switch module is in a stack, ensure that the stack has been set up by referring to "Checking Whether a Stack Is Set Up Successfully" in the CXxxx Switch Module Configuration Guide. The stack failure affects the configuration files.

    Figure 6-26 Switch module slot numbers

  4. Back up configuration files.

    1. Back up the Ethernet, FC plane, and FCoE gateway configuration files saved on the MM910. (Only the CX911, CX912, CX915, CX210, and CX220 have the FC plane configuration file. Only the CX311 has the FCoE gateway configuration file.)

      For details, see "Backing Up the Configuration File" or "Backing Up the MXxxx Configuration File by Using Web Tools" in the CXxxx Switch Module User Guide.

    2. If a CX912, CX210, or CX220 is to be replaced, query and record the WWN of the MX210 or MX220 in the switch module. For details, see step 4 in "Transferring Licenses" of the CXxxx Switch Module User Guide.

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 90959

Downloads: 5240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next