No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Management Modules

Installing Management Modules

During operations, wear protective gloves to prevent personal injury.


  1. Determine the slots for installing the management modules.

    A maximum of two management modules can be installed in an E9000 chassis. Figure 3-22 shows the slot numbers of management modules.
    Figure 3-22 Slot numbers of management modules

  2. Install management modules.

    1. Completely open the ejector lever on a management module, and horizontally insert the management module into the chassis slot. See (1) and (2) in Figure 3-23.
      Figure 3-23 Installing a management module
    2. Completely close the ejector lever of the management module. See (3) in Figure 3-23.
    3. Use a Phillips screwdriver to tighten the M3 captive screw on the management module. See (4) in Figure 3-23.
    4. Repeat 1 to 3 to install the other management module (if two management modules are required).

Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 96256

Downloads: 5270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next